Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RADIALUBE 7617
- Product Form
- Substance
Regulatory Identifiers
- CAS Number
- 10341-03-4 Check regulations →
- EC Number
- 233-739-4 Check regulations →
- REACH No.
- 01-2119971053-42
Identified Uses
General overview of industrial uses of fumarates esters General overview of manufacturing uses of fumarates esters
Uses advised against
No additional information available
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2, 9940 Ertvelde - Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
24/7
SGS ERS
+1 888 765 6554
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ditetradecyl fumarate EC: 233-739-4 | 10341-03-4 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Wash immediately with lots of water. Soap may be used. Take victim to a doctor if irritation persists.
Rinse immediately with plenty of water. Take victim to an ophthalmologist if irritation persists.
Rinse mouth with water. Call Poison Information Centre (www.who.int/ipcs/poisons/centre/directory/en). Consult a doctor/medical service if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC powder. Carbon dioxide. Dry sand. Dry chemical powder. Adapt extinguishing media to the environment.
Solid water jet ineffective as extinguishing medium.
DIRECT FIRE HAZARD: Combustible. In finely divided state: increased fire hazard. INDIRECT FIRE HAZARD: Temperature above flashpoint: higher fire/explosion hazard. DIRECT EXPLOSION HAZARD: Fine dust is explosive with air.
No specific fire-fighting instructions required.
Firefighter Protection
Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Prevent dust cloud formation, e.g. by wetting. No naked flames. Wash contaminated clothes. In case of dust production: keep upwind. Stop engines and no smoking. Spark-/explosionproof appliances/lighting equipment.
Prevent soil and water pollution.
Carefully collect the spill/leftovers. If melted: allow liquid to solidify before taking it up. Scoop solid spill into closing containers or into synthetic bags. Clean contaminated surfaces with an excess of water and soap solution.
Materials: closing containers or into synthetic bags
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid raising dust. Keep away from naked flames/heat. In finely divided state: use spark-/explosionproof appliances. Finely divided: keep away from ignition sources/sparks. Carry operations in the open/under local exhaust/ventilation or with respiratory protection. Comply with the legal requirements. Clean contaminated clothing. Powdered form: no compressed air for pumping over.
Keep container in a well-ventilated place. Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.
Clean contaminated clothing.
Keep away from naked flames/heat. Finely divided: keep away from ignition sources/sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. GIVE GOOD RESISTANCE: nitrile rubber
Safety glasses. In case of dust production: protective goggles
Dust production: dust mask with filter type P2. Dust production: dust mask with filter type P1
Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of (carbon monoxide - carbon dioxide).
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
According to literature: no environmental hazard. Slightly harmful to crustacea. Not harmful to fishes.
12.2. Persistence and degradability
12.2. Persistence and degradability
Readily biodegradable in water.
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Scoop solid spill into closing containers, Powdered: do not use compressed air for pumping over spills, Clean contaminated surfaces with a soap solution
Remove waste in accordance with local and/or national regulations. Remove to an authorized waste treatment plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
RADIALUBE 7617 regulatory status summary.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RADIALUBE 7617?
The signal word is no signal word.
What is the physical form of RADIALUBE 7617?
RADIALUBE 7617 is a solid appearing as solid. with white to light yellow. color. It has characteristic odour. almost odourless. odor.
What is the solubility of RADIALUBE 7617?
Insoluble in water.
What is RADIALUBE 7617 used for?
General overview of industrial uses of fumarates esters General overview of manufacturing uses of fumarates esters
What is the melting point of RADIALUBE 7617?
The melting point is > 45 °C and the boiling point is > 200 °C.