Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Fatty esters
- Product Form
- Substance (UVCB)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use
Uses advised against
No additional information available
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2, 9940 Ertvelde - Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
SGS ERS
+1 888 765 6554
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty esters | --- | 90% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. Consult a doctor/medical service.
Symptoms: Respiratory problems
Rinse with water. Soap may be used. Take victim to a doctor if irritation persists.
Symptoms: irritation
Rinse with water. Consult an ophthalmologist if irritation persists.
Symptoms: irritation
Rinse mouth thoroughly with water. Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Consult a doctor/medical service if you feel unwell or if symptoms persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC powder. Carbon dioxide. Dry sand. Dry chemical powder. Adapt extinguishing media to the environment.
Solid water jet ineffective as extinguishing medium.
DIRECT FIRE HAZARD: Combustible. INDIRECT FIRE HAZARD: Heating increases the fire hazard. Temperature above flashpoint: higher fire/explosion hazard.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Exposure to heat: have neighbourhood close doors and windows. Exposure to fire/heat: consider evacuation. Wash contaminated clothes.
Prevent soil and water pollution.
Clean contaminated surfaces with an excess of water and soap solution.
Materials: dry sand/earth/vermiculite or powdered limestone
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container in a well-ventilated place. Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. GIVE GOOD RESISTANCE: nitrile rubber
Safety glasses
Protective clothing. GIVE GOOD RESISTANCE: nitrile rubber
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of (carbon monoxide - carbon dioxide).
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
According to literature, the substance presents no environmental hazard. It is not classified for acute or chronic aquatic toxicity.
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Remove to an authorized waste treatment plant.
Prevent dispersion by covering with dry absorbent, Scoop solid spill into closing containers, Scoop absorbed substance into closing containers, Clean contaminated surfaces with an excess of water and soap solution, Wash clothing and equipment after handling
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Compliant with ECST, EC inventories
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Fatty esters?
The signal word is no signal word.
What is the physical form of Fatty esters?
Fatty esters is a liquid appearing as liquid. with colourless or light yellow. color. It has sweet. characteristic. odor.
What is the solubility of Fatty esters?
Soluble in oils/fats. soluble in most organic solvents. Insoluble in water.
What is Fatty esters used for?
Industrial use
What is the melting point of Fatty esters?
The melting point is < 0 °C and the boiling point is 375 °C (OECD 103).