Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EcoPrene 800
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119467170-45
Identified Uses
Tire Oils, Rubber Compounding, Automotive & Industrial Hoses, Dedusting, Plasticizer, Titanium Dioxide Wash, Compressor Wash Oils, Hydraulic Fracturing Oil, Adhesives, Carpet Backing, Feed Stock for White Oil, Refrigeration Oil, Diluents and Carriers, Carbon Black, Banbury Dust Stop, Defoamers, Sealants, Belts & Hoses, Coatings, Leather Tanning, Agriculture Oils.
Uses advised against
None known.
Manufacturers & Suppliers
Ergon, Inc.
manufacturer
P.O. Box 1639, Jackson, MS 39181 USA
Ergon International, Inc.
distributor
Drève Richelle 161 Building C, B-1410 Waterloo, Belgium
Emergency Contacts
US Customer Service
+1-800-222-7122
Chemtrec
+1-800-424-9300
Chemtrec
+1-703-527-3887
Chemtrec
+32-28083237
Chemtrec
+33-975181407
Chemtrec
+49-69643508409
Chemtrec
+39-0245557031
Chemtrec
+34-931768545
Poison Centre (Centre Antipoisons - Belgium)
+32022649636
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
General information
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy naphthenic EC: 265-155-0 | 64742-52-5 | 100% | No |
Notes
Note L - Not classified as a carcinogen. Meets EU requirement of less than 3% (w/w) DMSO extract for total polycyclic aromatic compound (PAC) using IP 346.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Oxygen or artificial respiration if needed. IF exposed or concerned: Get medical advice/attention.
Wash contact areas with soap and water. Remove contaminated clothing. Launder contaminated clothing before reuse. If skin irritation or an allergic skin reaction develops, get medical attention.
Symptoms: Defatting of the skin.
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.
Do NOT induce vomiting. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Call a poison control center immediately.
Immediate Medical Attention
Get medical attention immediately for eye contact, inhalation, or if skin irritation or an allergic skin reaction develops.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Halon. Dry chemicals. Foam. Carbon dioxide (CO2). Water spray or fog. Do not use water jet as an extinguisher, as this will spread the fire.
Do not use a solid water stream as it may scatter and spread fire.
No unusual fire or explosion hazards noted.
Cool containers exposed to flames with water until well after the fire is out. Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Use pressurized air mask if product is involved in a fire.
Firefighter Protection
Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary personnel away. Do not touch or walk through spilled material. Wear appropriate personal protective equipment. Ensure adequate ventilation. Avoid breathing mist/vapors.
Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth or absorbent material then place into containers. Following product recovery, flush area with water.
Prevent further leakage or spillage if safe to do so. Prevent entry into waterways, sewer, basements or confined areas. Avoid discharge to the aquatic environment. Avoid discharge into drains, water courses or onto the ground.
Absorb in vermiculite, dry sand or earth or absorbent material then place into containers. Following product recovery, flush area with water. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.
Materials: vermiculite, dry sand, earth, absorbent material, cloth, fleece
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe dust/fume/gas/mist/vapors/spray. Wash hands after handling and before eating. Do not get this material in contact with eyes. Avoid contact with skin. Avoid prolonged exposure. Shower after work. Remove and wash contaminated clothing promptly.
Keep away from heat, sparks and open flame. Store in a well-ventilated place.
Wash hands after handling and before eating. Shower after work. Remove and wash contaminated clothing promptly.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit is not exceeded.
Chemical resistant gloves are recommended. If contact with forearms is likely wear gauntlet style gloves. When prolonged or frequent repeated contact occurs, Nitrile gloves may be suitable. (Breakthrough time of > 240 minutes.) For incidental contact/splash protection Neoprene, PVC gloves may be suitable.
Goggles/face shield are recommended.
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Chemical/oil resistant clothing is recommended. Launder contaminated clothing before reuse.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
The product is stable and non-reactive under normal conditions of use, storage and transport.
Hazardous polymerization does not occur.
Avoid temperatures exceeding the flash point.
Strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Not expected to be harmful to aquatic organisms.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
12.2. Persistence and degradability
The substance is not inherently biodegradable.
12.3. Bioaccumulative potential
Bioaccumulation is unlikely to be significant because of the low water solubility of this product.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not classified as a PBT or vPvB substance or mixture.
12.6. Endocrine disrupting properties
12.7. Other adverse effects
No other adverse environmental effects are expected.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Avoid discharge into water courses or onto the ground.
Disposal recommendations are based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labelled in accordance with Regulation (EC) 1272/2008 (CLP Regulation) as amended. This Safety Data Sheet complies with the requirements of Regulation (EU) 2020/878.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EcoPrene 800?
The signal word is no signal word.
What is the physical form of EcoPrene 800?
EcoPrene 800 is a liquid. with amber. color. It has mild petroleum odor odor.
What is EcoPrene 800 used for?
Tire Oils, Rubber Compounding, Automotive & Industrial Hoses, Dedusting, Plasticizer, Titanium Dioxide Wash, Compressor Wash Oils, Hydraulic Fracturing Oil, Adhesives, Carpet Backing, Feed Stock for White Oil, Refrigeration Oil, Diluents and Carriers, Carbon Black, Banbury Dust Stop, Defoamers, Sealants, Belts & Hoses, Coatings, Leather Tanning, Agriculture Oils.
What are the hazard statements for EcoPrene 800?
This substance has 1 hazard statement:
- The mixture does not meet the criteria for classification.
What is the melting point of EcoPrene 800?
The melting point is Not available. and the boiling point is >600,01 °F (>315,56 °C) Simulated Distillation ASTM D2887.