Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RADIAMULS SORB 2162K
- Product Form
- Substance (UVCB)
- Chemical Name
- Sorbitan stearate
Regulatory Identifiers
- CAS Number
- 1338-41-6 Check regulations →
- EC Number
- 215-664-9 Check regulations →
- REACH No.
- 01-2119969652-26
Identified Uses
Industrial use Fit for use in foodstuffs
Uses advised against
No additional information available
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2 9940 Ertvelde - Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
24/7
SGS ERS
+1 888 765 6554
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sorbitan stearate SE EC: 215-664-9 | 1338-41-6 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Rinse with water. Soap may be used. Take victim to a doctor if irritation persists.
Rinse with water. Take victim to an ophthalmologist if irritation persists.
Rinse mouth with water. Call Poison Information Centre (www.who.int/ipcs/poisons/centre/directory/en). Consult a doctor/medical service if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC powder. Carbon dioxide. Dry sand. Dry chemical powder. Adapt extinguishing media to the environment.
Solid water jet ineffective as extinguishing medium.
DIRECT FIRE HAZARD: Not easily combustible. In finely divided state: increased fire hazard. INDIRECT FIRE HAZARD: Temperature above flashpoint: higher fire/explosion hazard.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Prevent dust cloud formation, e.g. by wetting. Dust production: have neighbourhood close doors and windows. Exposure to heat: have neighbourhood close doors and windows. In case of dust production: no naked flames or sparks. Dust: spark/explosionproof appliances/lighting equipment.
Prevent soil and water pollution.
Carefully collect the spill/leftovers. If melted: allow liquid to solidify before taking it up. Scoop solid spill into closing containers or into synthetic bags. Clean contaminated surfaces with an excess of water and soap solution.
Related Products
Similar products with comparable safety profiles
RADIAMULS SORB 2167K
CAS: 9005-65-6
RADIAMULS SORB 2166K
CAS: 1338-43-8
RADIAMULS SORB 2163K
CAS: 1338-41-6
RADIAMULS SORB 2168K
CAS: 1338-43-8
RADIAMULS SORB 2169K
CAS: 9005-65-6
RADIAMULS SORB 2146K
CAS: 1338-41-6
RADIAMULS SORB 2169
CAS: 9005-65-6
RADIAMULS SORB 2156K
CAS: 1338-43-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling temperature : ≥ 10 °C above melting point
Keep container in a well-ventilated place. Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. GIVE GOOD RESISTANCE: nitrile rubber
In case of dust production: protective goggles.
Dust production: dust mask with filter type P2.
Protective clothing. Materials for protective clothing: GIVE GOOD RESISTANCE: nitrile rubber
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of (carbon monoxide - carbon dioxide).
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
According to literature: no environmental hazard. Not classified for acute or chronic aquatic toxicity.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.1. Toxicity
According to literature: no environmental hazard. Not classified for acute or chronic aquatic toxicity.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
This substance/mixture does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Scoop solid spill into closing containers, Powdered: do not use compressed air for pumping over spills, Clean contaminated surfaces with a soap solution
Remove to an authorized waste treatment plant.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RADIAMULS SORB 2162K?
The signal word is no signal word.
What is the physical form of RADIAMULS SORB 2162K?
RADIAMULS SORB 2162K is a solid appearing as solid in various shapes. with white to light yellow. color. It has characteristic odour. almost odourless. odor.
What is the solubility of RADIAMULS SORB 2162K?
No data available
What is RADIAMULS SORB 2162K used for?
Industrial use Fit for use in foodstuffs
What is the melting point of RADIAMULS SORB 2162K?
The melting point is ≈ 55 °C and the boiling point is > 250 °C.