Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AlphaPlus® C20-24
- Product Code
- 1037057, 1083291, 1059406, 1059404, 1036985, 1037058
- Chemical Name
- Alkenes, C20-24 α-
Regulatory Identifiers
- CAS Number
- 93924-10-8 Check regulations →
- EC Number
- 300-202-1 Check regulations →
- REACH No.
- 01-2119485290-39-0000
Identified Uses
Manufacture Supported Use as an intermediate Formulation Use in Oil and Gas field drilling and production operations - Industrial Use in Oil and Gas field drilling and production operations – Professional Lubricants - Industrial Lubricants - Professional Lubricants - Consumer Metal working fluids / rolling oils - Industrial Metal working fluids / rolling oils – Professional Use as a fuel - industrial Use as a fuel – professional Use as a fuel – consumer Functional Fluids - Industrial Functional Fluids - Professional Functional Fluids - Consumer Use in polymer production – industrial Other consumer uses
Manufacturers & Suppliers
Chevron Phillips Chemical Company LP
manufacturer
10001 Six Pines Drive, The Woodlands, TX 77380
Chevron Phillips Chemicals International N.V.
local supplier
Airport Plaza (Stockholm Building) Leonardo Da Vincilaan 19 1831 Diegem Belgium
(832) 813-4862
http://www.CPChem.com
Emergency Contacts
Emergency Contact
866.442.9628
Emergency Contact
1.832.813.4984
CHEMTREC
800.424.9300
CHEMTREC
703.527.3887
CHEMWATCH
+612 9186 1132
Emergency Contact
0532 8388 9090
BIG
+32.14.584545
BIG
+32.14583516
CHEMTREC
01-800-681-9531
24 hours
SOS-Cotec
0800.111.767
SOS-Cotec
+55.19.3467.1600
Emergency Contact
+(54)-1159839431
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
C20-24 Alpha Olefin Fraction
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Alkenes, C20-24 α- EC: 300-202-1 | 93924-10-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: skin irritation
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: eye irritation
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Do not ingest. If swallowed then seek immediate medical assistance.
Immediate Medical Attention
If swallowed then seek immediate medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
High volume water jet.
Standard procedure for chemical fires. Use extinguishing fighting measures that are appropriate to local circumstances and the surrounding environment.
Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid dust formation. Avoid breathing dust.
Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.
Keep in suitable, closed containers for disposal.
Materials: suitable, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations.
Keep container tightly closed in a dry and well-ventilated place.
Smoking, eating and drinking should be prohibited in the application area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Adequate ventilation to control airborned concentrations below the exposure guidelines/limits. Consider the potential hazards of this material (see Section 2), applicable exposure limits, job activities, and other substances in the work place when designing engineering controls and selecting personal protective equipment. If engineering controls or work practices are not adequate to prevent exposure to harmful levels of this material, the personal protective equipment listed below is recommended.
The suitability for a specific workplace should be discussed with the producers of the protective gloves. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Eye wash bottle with pure water. Safety glasses.
Wear a supplied-air NIOSH approved respirator unless ventilation or other engineering controls are adequate to maintain minimal oxygen content of 19.5% by volume under normal atmospheric pressure. Wear a NIOSH approved respirator that provides protection when working with this material if exposure to harmful levels of airborne material may occur, such as:. Air-Purifying Respirator for Organic Vapors, Dusts and Mists. Use a positive pressure, air-supplying respirator if there is potential for uncontrolled release, aerosolization, exposure levels are not known, or other circumstances where air-purifying respirators may not provide adequate protection.
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. Wear as appropriate:. Protective suit. Safety shoes.
A quantitative risk assessment is not required for the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperature and pressure.
Stable at normal ambient temperature and pressure.
No decomposition if stored and applied as directed.
No data available.
No data available.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
This material is not expected to bioaccumulate.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
The material is not expected to be harmful to aquatic organisms based on short-term and long-term ecotoxicology assessments. No data is available regarding other adverse effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Use material for its intended purpose or recycle if possible.
Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3257
- Shipping Name
- ELEVATED TEMPERATURE LIQUID, N.O.S., (ALPHA OLEFIN FRACTION, C20-24)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Commission Regulation (EU) 2015/830 of 28 May 2015 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AlphaPlus® C20-24?
The signal word is danger.
What is the physical form of AlphaPlus® C20-24?
AlphaPlus® C20-24 is a solid appearing as wax., solid with white color.
What is the solubility of AlphaPlus® C20-24?
Soluble in hydrocarbon solvents; insoluble in water.
What is AlphaPlus® C20-24 used for?
Manufacture Supported Use as an intermediate Formulation Use in Oil and Gas field drilling and production operations - Industrial Use in Oil and Gas field drilling and production operations – Professional Lubricants - Industrial Lubricants - Professional Lubricants - Consumer Metal working fluids / rolling oils - Industrial Metal working fluids / rolling oils – Professional Use as a fuel - industrial Use as a fuel – professional Use as a fuel – consumer Functional Fluids - Industrial Functional Fluids - Professional Functional Fluids - Consumer Use in polymer production – industrial Other consumer uses
What are the hazard statements for AlphaPlus® C20-24?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of AlphaPlus® C20-24?
The melting point is 35°C (95°F) and the boiling point is 342-390°C (648-734°F).