Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Nouracid MPSC
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2, 9940 Ertvelde - Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
SGS ERS
+1 888 765 6554
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Pitches & residues | --- | 80% | No |
| Fatty acids (Constituent) | --- | 4 - 10% | Yes |
| Ketones (Constituent) | --- | 4 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air.
Symptoms: Irritation of the respiratory tract. Irritation of the nasal mucous membranes.
Wash immediately with lots of water (15 minutes)/shower. Soap may be used.
Rinse immediately with plenty of water for 15 minutes. Take victim to an ophthalmologist. Do not apply neutralizing agents.
Rinse mouth with water. Ingestion of large quantities: immediately to hospital. Call Poison Information Centre (www.who.int/ipcs/poisons/centre/directory/en).
Immediate Medical Attention
Depending on the victim's condition: doctor/hospital. Ingestion of large quantities: immediately to hospital. Take victim to an ophthalmologist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC powder. Carbon dioxide. Dry sand. Dry chemical powder. Adapt extinguishing media to the environment.
Solid water jet ineffective as extinguishing medium.
Fire hazard: DIRECT FIRE HAZARD: Combustible. In finely divided state: increased fire hazard. INDIRECT FIRE HAZARD: Temperature above flashpoint: higher fire/explosion hazard.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Exposure to fire/heat: keep upwind. Exposure to heat: have neighbourhood close doors and windows. In case of dust production: keep upwind. Dust production: have neighbourhood close doors and windows.
Prevent soil and water pollution.
Carefully collect the spill/leftovers. If melted: allow liquid to solidify before taking it up. Scoop solid spill into closing containers or into synthetic bags. Clean contaminated surfaces with an excess of water and soap solution.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling temperature: ≥ 10 °C above melting point
Store in a dry area. Meet the legal requirements. Store at room temperature.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. GIVE GOOD RESISTANCE: nitrile rubber
Safety glasses.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of (carbon monoxide - carbon dioxide).
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.4 Mobility in soil
12.4 Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Prevent dispersion by covering with dry absorbent, Scoop solid spill into closing containers, Scoop absorbed substance into closing containers, Clean contaminated surfaces with an excess of water and soap solution, Wash clothing and equipment after handling
Remove to an authorized incinerator equipped with an afterburner and a flue gas scrubber.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3265
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Hexanoic acid; Octanoic acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Nouracid MPSC?
The signal word is danger.
What is the physical form of Nouracid MPSC?
Nouracid MPSC is a liquid appearing as depending on ambient temperature: solid or liquid state. with light brown to black. color. It has characteristic odour. mild odour. odor.
What is the solubility of Nouracid MPSC?
Water: < 5 g/100ml Poorly soluble in water
What is Nouracid MPSC used for?
Industrial use
What are the hazard statements for Nouracid MPSC?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Nouracid MPSC?
The melting point is < -4 °C and the boiling point is > 200 °C.