Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NAUGALUBE® 438L
- Chemical Name
- Substitued amine
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 253-249-4 Check regulations →
- REACH No.
- 01-2119488911-28-0003, 01-2119488911-28-0004
Identified Uses
Antioxidant
Uses advised against
Industrial use, Professional use, Consumer use
Manufacturers & Suppliers
LANXESS Solutions UK Ltd.
manufacturer
Tenax Road, Trafford Park, Manchester, United Kingdom, M17 1WT
+44 161 875 3800
Emergency Contacts
NCEC
+44 (0) 1235 239 670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bis(nonylphenyl)amine EC: 253-249-4 | 36878-20-3 | 70 - 90% | Yes |
| diphenylamine EC: 204-539-4 | 122-39-4 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Remove contaminated clothing and shoes. Wash off with warm water and soap.
Rinse immediately with plenty of water for at least 15 minutes.
Do NOT induce vomiting. Rinse mouth with water.
Immediate Medical Attention
Obtain medical attention. If symptoms persist, call a physician.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguishing media - large fires, Alcohol-resistant foam (on small fires), Carbon dioxide (CO2), Dry chemical, Water spray
Water spray jet
May form explosive dust-air mixture.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Full protective flameproof clothing Complete suit protecting against chemicals
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8.
Do not allow material to contaminate ground water system.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Do not smoke. Avoid inhalation of vapour or mist. Use with adequate ventilation. Wash thoroughly after handling.
Keep in a dry, cool place.
Wash thoroughly after handling.
Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location.
Impervious butyl rubber gloves
Safety glasses with side-shields
In the case of vapour formation use a respirator with an approved filter.
Lightweight protective clothing
Do not allow material to contaminate ground water system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Hazardous polymerisation does not occur.
Heat, flames and sparks. Exposure to moisture. Exposure to water vapour.
Strong oxidizing agents
Carbon oxides, Nitrogen oxides (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
Not readily biodegradable.
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Other adverse effects
May cause long-term adverse effects in the aquatic environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as hazardous waste in compliance with local and national regulations.
Dispose of as hazardous waste in compliance with local and national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information for NAUGALUBE® 438L according to Regulation (EC) No. 1907/2006.
Please note that Section 3 of this document lists only the hazardous components required by the specific country or region hazard communication regulations. The chemical inventory information given in Section 15 of this document applies to the product as a whole.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NAUGALUBE® 438L?
The signal word is no signal word.
What is the physical form of NAUGALUBE® 438L?
NAUGALUBE® 438L is a liquid appearing as liquid with brown color. It has characteristic odor.
What is NAUGALUBE® 438L used for?
Antioxidant
What are the hazard statements for NAUGALUBE® 438L?
This substance has 1 hazard statement:
- H413: May cause long lasting harmful effects to aquatic life.