NextSDS Logo
Safety Data Sheet EN

LOCTITE 572

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE 572

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Anaerobic

Manufacturers & Suppliers

H

Henkel Ltd

manufacturer

Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain

+44 1442 278000

Emergency Contacts

Emergency Contact

+44 (0)1442 278497

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P501 Dispose of contents/container in accordance with national regulation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Anaerobic adhesive

Chemical Name CAS Number Concentration Hazardous
Octan-1-ol EC: 203-917-6 111-87-5 10 - 20% Yes
Titanium dioxide EC: 236-675-5 13463-67-7 1 - 5% No
Cumene hydroperoxide EC: 201-254-7 80-15-9 0.1 - 1% Yes
Linalool EC: 201-134-4 78-70-6 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Rinse with running water and soap. Obtain medical attention if irritation persists.

Symptoms: Prolonged or repeated contact may cause skin irritation.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.

Symptoms: Irritation, conjunctivitis.

Ingestion

Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, foam, powder

Unsuitable media

None known

Specific hazards

In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Small spill

wipe up with paper towel and place in container for disposal.

Large spill

absorb onto inert absorbent material and place in sealed container for disposal.

Environmental

Do not empty into drains / surface water / ground water.

Cleanup methods

wipe up with paper towel and place in container for disposal (small spills); absorb onto inert absorbent material and place in sealed container for disposal (large spills).

Materials: paper towel, inert absorbent material

—

Related Products

Similar products with comparable safety profiles

L

LOCTITE 572

---

L

LOCTITE 573

---

L

LOCTITE 567

---

L

LOCTITE 567

---

L

LOCTITE 577

---

L

LOCTITE 577

---

L

LOCTITE 577

---

L

LOCTITE 577

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Avoid skin and eye contact. Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation.

Storage

Refer to Technical Data Sheet

Hygiene

Good industrial hygiene practices should be observed. Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation/extraction.

Hands

Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.

Eyes

Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.

Respiratory

Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)

Skin/Body

Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
paste, liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
paste, liquid
Colour
white
Colour Intensity
---
Form
---
Odor
slightly
Odor Threshold
No data available / Not applicable
Ph
No data available / Not applicable
Melting Point
No data available / Not applicable
Boiling Point
No data available / Not applicable
Flash Point
> 93 °C (> 199.4 °F); no method
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available / Not applicable
Vapor Pressure
No data available / Not applicable
Vapor Density
---
Relative Density
---
Bulk Density
No data available / Not applicable
Density
No data available / Not applicable
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
No data available / Not applicable
Decomposition Temperature
No data available / Not applicable
Solubility
No data available / Not applicable
Partition Coefficient
No data available / Not applicable
Solubility In Water
Insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available / Not applicable
Kinematic Viscosity
No data available / Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Peroxides.

Hazardous reactions

See section reactivity

Avoid

No decomposition if used according to specifications.

Incompatible

See section reactivity.

Decomposition

carbon oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Toxicity (Fish): The mixture is classified based on calculation method referring to the classified substances present in the mixture.

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Octan-1-ol 111-87-5 | LC50 | 13,3 mg/l | 96 h | Pimephales promelas | OECD Guideline 203 (Fish, Acute Toxicity Test) |

12.2 Persistence and degradability

No data available

12.3 Bioaccumulative potential

No data available

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

No data available

12.6 Endocrine disrupting properties

No data available

12.7 Other adverse effects

No data available

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Titanium dioxide 13463-67-7 | LC50 | | 48 h | Leuciscus idus | OECD Guideline 203 (Fish, Acute Toxicity Test) |

12.1 Toxicity

LC50 3,9 mg/l 96 h Oncorhynchus mykiss OECD Guideline 203 (Fish, Acute Toxicity Test)

12.1 Toxicity

Linalool 78-70-6 | LC50 | 27,8 mg/l | 96 h | Salmo gairdneri (new name: Oncorhynchus mykiss) | OECD Guideline 203 (Fish, Acute Toxicity Test)

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Octan-1-ol 111-87-5 | EC50 | 47 mg/l | 24 h | Daphnia magna | OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test)

12.1 Toxicity

Titanium dioxide 13463-67-7 | EC50 | | 48 h | Daphnia magna | OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test)

12.1 Toxicity

Cumene hydroperoxide 80-15-9 EC50 18 mg/l 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test)

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Linalool 78-70-6 | EC50 | 59 mg/l | 48 h | Daphnia magna | OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) |

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Octan-1-ol 111-87-5 | NOEC | 1 mg/l | 21 d | Daphnia magna | OECD 211 (Daphnia magna, Reproduction Test) | #### Toxicity (Algae): | Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- | | Octan-1-ol 111-87-5 | EC10 | 4,2 mg/l | 48 h | Scenedesmus subspicatus (new name: Desmodesmus subspicatus) | DIN 38412-09 | | Octan-1-ol 111-87-5 | EC50 | 14 mg/l | 48 h | Scenedesmus subspicatus (new name: Desmodesmus subspicatus) | DIN 38412-09 |

12.1 Toxicity

Titanium dioxide 13463-67-7 | EC50 | 72 h | Pseudokirchneriella subcapitata | OECD Guideline 201 (Alga, Growth Inhibition Test)

12.1 Toxicity

ErC50 3,1 mg/l 72 h Pseudokirchneriella subcapitata OECD Guideline 201 (Alga, Growth Inhibition Test)

12.1 Toxicity

Linalool 78-70-6 | EC50 | 88,3 mg/l | 96 h | Scenedesmus subspicatus (new name: Desmodesmus subspicatus) | OECD Guideline 201 (Alga, Growth Inhibition Test) Linalool 78-70-6 | EC10 | 38,4 mg/l | 96 h | Scenedesmus subspicatus (new name: Desmodesmus subspicatus) | OECD Guideline 201 (Alga, Growth Inhibition Test)

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Octan-1-ol 111-87-5 | EC 50 | 350 mg/l | 3 h | activated sludge | OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test) |

12.1 Toxicity

Titanium dioxide 13463-67-7 | EC0 | | 24 h | Pseudomonas fluorescens | DIN 38412, part 8 (Pseudomonas Zellvermehrungshemm-Test)

12.1 Toxicity

Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Cumene hydroperoxide 80-15-9 | EC10 | 70 mg/l | 30 min | | not specified |

12.1 Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Linalool 78-70-6 | EC0 | 100 mg/l | 3 h | | OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test) |

12.2. Persistence and degradability

The product is not biodegradable. | Hazardous substances CAS-No. | Result | Test type | Degradability | Exposure time | Method | | --- | --- | --- | --- | --- | --- |

The product is not biodegradable.

12.2 Persistence and degradability

Octan-1-ol 111-87-5 | readily biodegradable | aerobic | 92 % | 28 d | OECD Guideline 310 (Ready BiodegradabilityCO2 in Sealed Vessels (Headspace Test)

12.2 Persistence and degradability

Hazardous substances CAS-No. | Result | Test type | Degradability | Exposure time | Method | | Cumene hydroperoxide 80-15-9 | | no data | 0 % | 28 d | OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test) |

12.2 Persistence and degradability

| Hazardous substances CAS-No. | Result | Test type | Degradability | Exposure time | Method | | Linalool 78-70-6 | readily biodegradable | aerobic | >97,1 % | 28 d | OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test) | | Linalool 78-70-6 | inherently biodegradable | | 100 % | 13 d | OECD Guideline 302 B (Inherent biodegradability: Zahn-Wellens/EMPA Test) |

12.3 Bioaccumulative potential

Bioconcentration factor (BCF) 9,1 calculation OECD Guideline 305 (Bioconcentration: Flow-through Fish Test)

12.4. Mobility in soil

Cured adhesives are immobile.

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

Octan-1-ol 111-87-5 | 3,5 | 23 °C | OECD Guideline 117 (Partition Coefficient (n-octanol / water), HPLC Method)

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.3 Bioaccumulative potential

| Hazardous substances CAS-No. | LogPow | Temperature | Method | | Cumene hydroperoxide 80-15-9 | 2,16 | | not specified |

12.3 Bioaccumulative potential

Hazardous substances CAS-No. | LogPow | Temperature | Method | Linalool 78-70-6 | 3,1 | 25 °C | OECD Guideline 107 (Partition Coefficient (n-octanol / water), Shake Flask Method)

12.5. Results of PBT and vPvB assessment

| Hazardous substances CAS-No. | PBT / vPvB | | --- | --- | | Octan-1-ol 111-87-5 | Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. | | Titanium dioxide 13463-67-7 | According to Annex XIII of regulation (EC) 1907/2006 a PBT and vPvB assessment shall not be conducted for inorganic substances. | | Cumene hydroperoxide 80-15-9 | Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. | | Linalool 78-70-6 | Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. |

The substances listed do not fulfill the PBT/vPvB criteria, or are inorganic substances for which such assessment is not required under Annex XIII of regulation (EC) 1907/2006.

12.6. Other adverse effects

No data available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local and national regulations.

Disposal

Contribution of this product to waste is very insignificant in comparison to article in which it is used

Waste Codes

08 04 09 waste adhesives and sealants containing organic solvents and other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

VOC content < 3% (2010/75/EC)

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE 572?

The signal word is warning.

What is the physical form of LOCTITE 572?

LOCTITE 572 is a paste, liquid appearing as paste, liquid with white color. It has slightly odor.

What is the solubility of LOCTITE 572?

No data available / Not applicable

What is LOCTITE 572 used for?

Anaerobic

What are the hazard statements for LOCTITE 572?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of LOCTITE 572?

The melting point is No data available / Not applicable and the boiling point is No data available / Not applicable.