Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- De-oxidising gel IF 930
- Product Form
- Mixture
- Product Code
- RP930*
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 14RE-05XT-Q00V-ATGH
Identified Uses
De-oxidising gel
Uses advised against
No additional information available
Manufacturers & Suppliers
Interflux® Electronics nv N.V.
manufacturer
Eddastraat, 51, BE- 9042 Gent – Belgium
+32 9 2514959
http://www.interflux.com
Emergency Contacts
Emergency Contact
+1-800-424-9300
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| adipic acid EC: 204-673-3 | 124-04-9 | 50 - 60% | Yes |
| terpineol, mixture of isomers EC: 232-268-1 | 8000-41-7 | 1 - 15% | Yes |
| Non ionic surfactant EC: 603-182-5 | 127036-24-2 | 2 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After contact with skin, wash immediately with plenty of warm water and soap.
Symptoms: Irritation.
Rinse immediately with plenty of water.
Symptoms: Irritation of the eye tissue. Redness of the eye tissue. In case of splash from hot solder, irritation to the eyes and if not removed, may result in serious injury.
Do NOT induce vomiting.
Symptoms: AFTER INGESTION OF HIGH QUANTITIES: Gastrointestinal complaints.
Immediate Medical Attention
Consult a doctor/medical service for respiratory problems. Consult an ophtalmologist if irritation persists. Call a poison center or a doctor if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, CO2, or water spray or regular foam.
Do not use extinguishing media containing water.
Fire hazard: None.
This product is not to be used under conditions of poor ventilation. Evacuate area.
Firefighter Protection
Self-contained breathing apparatus. EN 136. EN 137.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Sweep spilled substance into containers; if appropriate, moisten first to prevent dusting. No naked flames. Wash contaminated clothes.
Prevent entry to sewers and public waters.
Sweep spilled substance into containers
Materials: absorbent material (e.g., sand/earth)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Clean contaminated clothing. Observe normal hygiene standards. Carry out operations in the open/under local exhaust/ventilation or with respiratory protection.
Store at ambient temperature. Store in a dry area.
Always wash hands and face immediately after handling this product, and once again before leaving the workplace. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves. (Nitrile rubber): Recommended thickness: >0.35mm. The selected protective gloves must meet the specifications of EU Directive 89/686/EEC and EN 374, derived therefrom
Safety glasses with side shields
Local exhaust is needed at source of vapours
protective clothing. EN 14605. EN 13034. Good resistance: Nitrile rubber
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No additional information available
No additional information available
All heat sources, including direct sunlight. Temperatures below 5°C.
reducing agents/(strong) acids /(strong) bases.
No additional information available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Mild water pollutant (surface water). Not soluble in water, so only minimally biodegradable.
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
Not readily biodegradable in water.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
Low potential for bioaccumulation (Log Kow < 4).
12.3. Bioaccumulative potential
The substance is not bioaccumulable.
12.3. Bioaccumulative potential
Low potential for bioaccumulation (Log Kow < 4).
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance/mixture does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle by distillation. In authorized incinerator equipped with flue gas scrubber with energy recovery. Remove to an authorized incinerator equipped with an afterburner and a flue gas scrubber with energy recovery.
Recycle by distillation. In authorized incinerator equipped with flue gas scrubber with energy recovery. Remove to an authorized incinerator equipped with an afterburner and a flue gas scrubber with energy recovery.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for De-oxidising gel IF 930?
The signal word is warning.
What is the physical form of De-oxidising gel IF 930?
De-oxidising gel IF 930 is a gel appearing as viscous. gel. with white-yellow. color. It has mild odour. odor.
What is the solubility of De-oxidising gel IF 930?
Water: Insoluble
What is De-oxidising gel IF 930 used for?
De-oxidising gel
What are the hazard statements for De-oxidising gel IF 930?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of De-oxidising gel IF 930?
The melting point is Not applicable. and the boiling point is Not available.