NextSDS Logo
Safety Data Sheet EN

N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride

CAS 20228-51-7

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride
Product Code
CSC000736397

Regulatory Identifiers

CAS Number
20228-51-7 Check regulations →

Identified Uses

Laboratory chemicals, research and development use only.

Manufacturers & Suppliers

S

SIA "CHEMSPACE"

manufacturer

Ilukstes iela 38-5 Riga LV-1082 Latvia

+37127060007

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling. Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P312 IF SWALLOWED: call a POISON CENTER or doctor/physician IF you feel unwell.
P302 + P352 IF ON SKIN: wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P330 Rinse mouth.
P332 + P313 IF SKIN irritation occurs: Get medical advice/attention.
P337 + P313 IF eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Synonyms: N-(2-aminoethyl)-p-toluenesulfonamide hydrochloride Formula: C9H15ClN2O2S Molecular Weight: 250.7456 CAS number: 20228-51-7 EC number: N/A Hazardous ingredients according to Regulation (EC) No 1272/2008

Chemical Name CAS Number Concentration Hazardous
N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride 20228-51-7 --- Yes

For the full text of the H-Statements mentioned in this Section, see Section 2.2.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention immediately.

Skin contact

In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician.

Eye contact

In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician.

Ingestion

If swallowed, wash out mouth with water provided person is conscious. Call a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Sand, carbon dioxide, dry chemical powder, or appropriate foam.

Specific hazards

May emit toxic fumes under fire conditions including Carbon monoxide, Carbon dioxide, Hydrogen chloride, Nitrogen oxides, Sulfur oxides.

Instructions

Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. In case of fire in the surroundings: remove movable containers if safe to do so.

Firefighter Protection

Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.

Environmental

Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Cleanup methods

Wipe dry, place a rag in a bag and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete.

Materials: rag, bag

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handling is performed in a well ventilated place. Wear suitable protective equipment. Do not breathe vapor. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure. Wash hands and face thoroughly after handling.

Storage

Keep container tightly closed and upright. Avoid overheating. Store in a dry and well-ventilated place at RT.

Hygiene

Wash hands and face thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Install a closed system or local exhaust so that workers should not be exposed directly.

Hands

Compatible chemical-resistant gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Wash and dry hands.

Eyes

Government approved eye/face protection equipment.

Respiratory

Government approved respirator.

Skin/Body

Protective clothing. Protective boots, if the situation requires.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
powder
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
white
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
0.917
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under specified storage temperature.

Hazardous reactions

No data available

Avoid

Keep in a well-sealed container

Incompatible

Strong oxidizing agents.

Decomposition

Carbon monoxide, Carbon dioxide, Hydrogen chloride, Nitrogen oxides, Sulfur oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No data available

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride?

The signal word is warning.

What is the physical form of N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride?

N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride is a powder with white color.

What is N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride used for?

Laboratory chemicals, research and development use only.

What are the hazard statements for N-(2-aminoethyl)-4-methylbenzene-1-sulfonamide hydrochloride?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed
  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H335: May cause respiratory irritation