Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- C.f.a.s. CK MB bottle with value for RAS
- Product Code
- 11460412101
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals Refer to product literature for further details.
Manufacturers & Suppliers
Roche Diagnostics Deutschland GmbH
manufacturer
Sandhoferstrasse Mannheim, 68305, Deutschland
+496217590
Emergency Contacts
Werkschutzzentrale Roche Diagnostics GmbH
+49(0)621-759-2203
Giftnotruf: Mainz
+49(0)6131-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| α-D-Glucopyranoside, β-D-fructofuranosyl | 57-50-1 | 10 - 30% | No |
| Butanedioic acid, hydroxy-, (S)- | 97-67-6 | 10 - 30% | No |
| L-Cysteine, N-acetyl- | 616-91-1 | 1 - 5% | No |
| Glycine, N,N'-1,2-ethanediylbis[N-(carboxymethyl)-, disodium salt, dihydrate | 6381-92-6 | 1 - 5% | No |
| Creatine kinase | 9001-15-4 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
Symptoms: May cause damage to organs through prolonged or repeated exposure if inhaled.
If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: Causes skin irritation.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Causes serious eye irritation.
Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Rinse mouth with water.
Immediate Medical Attention
If symptoms persist, call a physician.
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
No information available.
Standard procedure for chemical fires.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so.
Keep in suitable, closed containers for disposal.
Related Products
Similar products with comparable safety profiles
C.f.a.s. CK MB bottle with value for RAS
---
C.f.a.s. CK-MB
---
C.f.a.s. CK-MB
---
C.f.a.s. CK-MB
---
C.f.a.s. CK-MB
---
LABEL OFF 50 200ML KC
---
BactT/ALERT® FA Bottle, BacT/ALERT® FN Bottle, BacT/ALERT® PF Bottle, BacT/ALERT® SA Bottle, BacT/ALERT® SN Bottle, BacT/ALERT® MP Bottle, BacT/ALERT® MB Bottle
---
TEROSON MS 930 BK known as TEROSTAT MS 930 Black 570 ml SA
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of respirable particles. Do not breathe vapors/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place.
Smoking, eating and drinking should be prohibited in the application area.
Avoid dust formation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: In case of contact through splashing: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0.11 mm. Material: In case of full contact: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0.4 mm. Remarks: The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. This recommendation is only valid for the product mentioned in the material safety data sheet and provided by us and for the application specified by us. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.
Dust impervious protective suit Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
No dangerous reaction known under conditions of normal use.
moisture
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
Persistence and degradability
Persistence and degradability
Bioaccumulative potential
Bioaccumulative potential
Bioaccumulative potential
Bioaccumulative potential
Bioaccumulative potential
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a licensed waste management company. Can be disposed as waste water, when in compliance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for C.f.a.s. CK MB bottle with value for RAS?
The signal word is warning.
What is the physical form of C.f.a.s. CK MB bottle with value for RAS?
C.f.a.s. CK MB bottle with value for RAS is a solid appearing as solid with light yellow color. It has odorless odor.
What is C.f.a.s. CK MB bottle with value for RAS used for?
Laboratory chemicals Refer to product literature for further details.
What are the hazard statements for C.f.a.s. CK MB bottle with value for RAS?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H373: May cause damage to organs (Respiratory system) through prolonged or repeated exposure if inhaled.