NextSDS Logo
Safety Data Sheet EN

EASYLINE EDGE 750ml Aerosol, ALL COLOURS

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
EASYLINE EDGE 750ml Aerosol, ALL COLOURS
Product Form
Mixture
Product Code
47000-47009

Regulatory Identifiers

CAS Number
N/A
UFI Code
7800-D0RN-W00U-DDRD

Identified Uses

Professional use, Industrial use Industrial For professional use only

Uses advised against

Acetone is listed as a reportable explosives precursor in Annex II of EU regulation 2019/1148

Manufacturers & Suppliers

ROCOL a division of ITW Ltd logo

ROCOL a division of ITW Ltd

manufacturer

Rocol House Wakefield Rd, Swillington, LS26 8BS Leeds – West Yorkshire, United Kingdom

+44 (0)113 232 2600

http://www.rocol.com

Emergency Contacts

Emergency Contact

+44 (0)113 232 2600

National Poisons Information Service (Birmingham Centre) City Hospital

0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
dimethyl ether EC: 204-065-8 115-10-6 10 - 30% Yes
CALCIUM CARBONATE COMMERCIAL GRADE EC: 207-439-9 471-34-1 10 - 30% No
o-xylene EC: 202-422-2 95-47-6 5 - 15% Yes
ACETONE EC: 200-662-2 67-64-1 5 - 10% Yes
1-METHOXY-2-PROPANOL EC: 203-539-1 107-98-2 2.4 - 10% Yes
CARBON DIOXIDE AEROSOL PROPELLANT EC: 204-696-9 124-38-9 1 - 2.4% Yes

Product subject to CLP Article 1.1.3.7. The disclosure rules of the components is modified in this case.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Allow affected person to breathe fresh air. Allow the victim to rest.

Skin contact

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.

Eye contact

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.

Symptoms: pain, blinking or redness

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.

Immediate Medical Attention

Obtain medical attention if pain, blinking or redness persists. Obtain emergency medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Vapours may form explosive mixture with air. Pressurised container: May burst if heated.

Instructions

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Materials: inert solids, such as clay or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.

Storage

Store in a well-ventilated place. Keep cool. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store in a dry place.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Fire prevention

Sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Disposable gloves, Material: Nitrile rubber (NBR), Penetration: 2 (< 1.5)

Eyes

Chemical goggles or safety glasses. Type: Safety glasses, Field of application: Droplet, Characteristics: With side shields, Standard: EN 166

Respiratory

No respiratory protection needed under normal use conditions. In case of inadequate ventilation wear respiratory protection. Device: Reusable half mask, Filter type: Type P1, Type AX - Low-boiling (<65 °C) organic compounds, Condition: Vapour protection, Mist formation, Protection for Liquid particles, Protection for Solid particles, If conc. in air > exposure limit

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
Liquid.
Colour
Black. Blue. Green. Grey. Orange. red. white. Yellow.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
< 0 °C
Flash Point
< 0 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
Non flammable.
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Not established.

Reactivity

No additional information available

Hazardous reactions

Not established.

Avoid

Direct sunlight. Extremely high or low temperatures.

Incompatible

Strong acids. Strong bases.

Decomposition

fume. Carbon monoxide. Carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Hazardous to the aquatic environment, short-term : Not classified (acute) Hazardous to the aquatic environment, long-term : Not classified (chronic)

12.1. Toxicity

LC50 - Fish [1] > 4.1 g/l Test organisms (species): Poecilia reticulata EC50 - Crustacea [1] > 4.4 g/l Test organisms (species): Daphnia magna EC50 96h - Algae [1] 154.917 mg/l Test organisms (species): other:green algae

12.1. Toxicity

| o-xylene (95-47-6) | | | LC50 - Fish [1] | 7.6 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) | | EC50 72h - Algae [1] | 4.7 mg/l Test organisms (species): Pseudokirchneriella subcapitata (previous names: Raphidocelis subcapitata, Selenastrum capricornutum) | | NOEC (chronic) | 1.17 mg/l Test organisms (species): Ceriodaphnia dubia Duration: '7 d' | | o-xylene (95-47-6) | | | --- | --- | | NOEC chronic fish | >1.3 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) Duration: '56 d' |

12.2. Persistence and degradability

Not established.

12.3. Bioaccumulative potential

Not established.

12.4. Mobility in soil

No additional information available

12.5. Results of PBT and vPvB assessment

No additional information available

12.6. Endocrine disrupting properties

No additional information available

12.7. Other adverse effects

Additional information : Avoid release to the environment.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose in a safe manner in accordance with local/national regulations.

Waste Codes

08 01 11* waste paint and varnish containing organic solvents or other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for EASYLINE EDGE 750ml Aerosol, ALL COLOURS?

The signal word is danger.

What is the physical form of EASYLINE EDGE 750ml Aerosol, ALL COLOURS?

EASYLINE EDGE 750ml Aerosol, ALL COLOURS is a liquid appearing as liquid. with black. blue. green. grey. orange. red. white. yellow. color. It has characteristic. odor.

What is EASYLINE EDGE 750ml Aerosol, ALL COLOURS used for?

Professional use, Industrial use Industrial For professional use only

What are the hazard statements for EASYLINE EDGE 750ml Aerosol, ALL COLOURS?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.