Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sterillium Gel pure
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In-door use Hand Sanitizer Human hygiene biocidal products For further information, refer to the product technical data sheet.
Manufacturers & Suppliers
BODE Chemie GmbH
manufacturer
Melanchthonstraße 27 22525 Hamburg (Germany)
+49 (0)40 / 54 00 60
Emergency Contacts
Poison Center Göttingen
+49 (0)551 / 1 92 40
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes.
Symptoms: Causes serious eye irritation.
Do NOT induce vomiting. Rinse mouth.
Medical Treatment
For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Standard procedure for chemical fires.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Remove all sources of ignition.
Wipe up with absorbent material (e.g. cloth, fleece).
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Should not be released into the environment.
Wipe up with absorbent material (e.g. cloth, fleece). Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: cloth, fleece, sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes.
Store in original container. Keep tightly closed.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take measures to prevent the build up of electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No decomposition if stored and applied as directed.
None reasonably foreseeable.
Heat, flames and sparks. Strong sunlight for prolonged periods.
None.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
12.1 Toxicity
Persistence and degradability
Persistence and degradability
Bioaccumulative potential
Bioaccumulative potential
Mobility in soil
Endocrine disrupting properties
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as hazardous waste in compliance with local and national regulations.
Waste codes should be assigned by the user, preferably in discussion with the waste disposal authorities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1170
- Shipping Name
- ETHANOL SOLUTION
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sterillium Gel pure?
The signal word is danger.
What is the physical form of Sterillium Gel pure?
Sterillium Gel pure is a viscous appearing as viscous with colourless color. It has alcohol-like odor.
What is Sterillium Gel pure used for?
In-door use Hand Sanitizer Human hygiene biocidal products For further information, refer to the product technical data sheet.
What are the hazard statements for Sterillium Gel pure?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of Sterillium Gel pure?
The melting point is not determined and the boiling point is > 80 °C.