SODIUM BISELENITE

Remove to fresh air. If not breathing, give artificial respiration. Immediate medical attention is required.

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get medical attention immediately if symptoms occur.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Do not induce vomiting without medical advice. Clean mouth with water. If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention.

Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.

No information available.

Burning produces obnoxious and toxic fumes. Keep product and empty container away from heat and sources of ignition.

Evacuate personnel to safe areas. Use personal protective equipment as required.

Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. Prevent product from entering drains. Avoid release to the environment. Collect spillage.

Clean contaminated surface thoroughly.

Avoid contact with skin, eyes or clothing.

Keep containers tightly closed in a dry, cool and well-ventilated place. Protect from direct sunlight.

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.

Use only under a chemical fume hood. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source

Protective gloves. Glove material: Natural rubber, Nitrile rubber, Neoprene, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. (minimum requirement)

Wear safety glasses with side shields (or goggles) (European standard - EN 166)

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particulates filter conforming to EN 143. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended half mask: Particle filtering: EN149:2001. When RPE is used a face piece Fit Test should be conducted.

Long sleeved clothing.

Prevent product from entering drains. Avoid dust formation.

Stable under recommended storage conditions.

None known, based on information available

Hazardous Polymerization: Hazardous polymerization does not occur. Hazardous Reactions: None under normal processing.

Exposure to moisture. Protect from direct sunlight.

Strong oxidizing agents. Strong acids.

Burning produces obnoxious and toxic fumes.

Dispose of in accordance with federal, state and local regulations. Should not be released into the environment. Waste is classified as hazardous. Dispose of in accordance with the European Directives on waste and hazardous waste.

Dispose of in accordance with federal, state and local regulations.