Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Control-HLA
- Product Code
- 824 101, 824 106, 824 110
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Use as laboratory reagent.
Uses advised against
Only for industrial users.
Manufacturers & Suppliers
Bio-Rad Medical Diagnostics GmbH
manufacturer
Industriestr. 1, 63303 Dreieich
+49 (0)6103-3130-0
http://www.medizinische-diagnostik-dreieich.de
Emergency Contacts
GIZ-Nord, Göttingen, Germany
+49 551-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterisation: lyophilisate Contains: protein
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide EC: 247-852-1 | 26628-22-8 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Seek medical treatment in case of troubles.
Remove residues with water. Change contaminated clothing. In case of skin reactions, consult a physician.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. In case of eye irritation consult an ophthalmologist.
Rinse mouth and drink large quantities of water. Observe risk of aspiration if vomiting occurs. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Immediately get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing material as appropriate for the surrounding area.
Full water jet
Fires in the immediate vicinity may cause the development of dangerous vapours.
Firefighter Protection
Wear self-contained breathing apparatus. Wear appropriate protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with the substance. Provide adequate ventilation. Wear personal protection equipment. Do not breathe vapours.
Do not allow to penetrate into soil, waterbodies or drains.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not breathe dust. Wear appropriate protective equipment.
Keep container dry. Keep containers tightly closed and at a temperature between 2 °C and 8 °C.
Keep all containers, equipment and working place clean.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and/or an exhaust system in the work area.
Protective gloves according to EN 374. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166.
Respiratory protection must be worn whenever the WEL levels have been exceeded. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
refer to 10.3
No hazardous reactions known.
Protect from moisture contamination.
Strong acids and alkalis
Styrene, Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Harmful to aquatic life with long lasting effects.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No data available regarding the partition coefficient.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Small quantities can be disposed of with the domestic waste or burnt, with due observance of regulations of local authorities. Large quantities are hazardous waste and must be disposed of accordingly.
Small quantities can be disposed of with the domestic waste or burnt, with due observance of regulations of local authorities. Large quantities are hazardous waste and must be disposed of accordingly.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
transportation temperature: ambient temperature
transportation temperature: ambient temperature
transportation temperature: ambient temperature
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Control-HLA?
The signal word is no signal word.
What is the physical form of Control-HLA?
Control-HLA is a solid with colourless-yellowish color. It has odourless odor.
What is the solubility of Control-HLA?
soluble in Ethanol
What is Control-HLA used for?
Use as laboratory reagent.
What are the hazard statements for Control-HLA?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Control-HLA?
The melting point is No data available and the boiling point is No data available.