Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Determine™ HIV-1/2 Ag/Ab Combo Controls, HIV-1 Control & HIV-2 Control
- Product Code
- 7D2628
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostic reagent. For professional use only.
Manufacturers & Suppliers
Abbott Diagnostics Scarborough, Inc.
manufacturer
10 Southgate Road, Scarborough, ME 04074 - United States
+1 (207) 730-5750
Emergency Contacts
Emergency Contact
+1 (800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous preparation containing the hazardous components listed below.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide | 26628-22-8 | 0.1% | Yes |
Contains materials of human origin. Biological materials of human origin contained in this product were tested for Anti-HCV, and HBs Ag on a single donor basis using FDA approved methods and were found to be nonreactive. Additionally the plasma was heat treated.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaint.
Wash skin with soap and water. Remove soiled clothing.
Rinse cautiously with water for several minutes. Consult a doctor in case of complaint.
Wash out mouth with water. Consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
In case of fire, the following can be released: Carbon oxides (COx), nitrogen oxides (NOx).
Firefighter Protection
Wear full protective suit and self-contained breathing apparatus (SCBA) when extinguishing fires.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate spillage and clean up immediately.
Avoid release to the environment.
clean up immediately
Materials: paper towelling, sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
This product should be handled as a potentially infectious material, as no known test method / inactivation procedure can offer complete assurance that products derived from human blood will not transmit infectious agents. Avoid contact with the eyes, skin and mucous membranes. Keep out of reach of children.
Store in the original container at 2 to 8°C.
Wash hands before breaks and after work. Clean work areas with hypochlorite or other disinfecting agent.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not relevant for this material.
Disposable gloves. Material of gloves: Latex / natural rubber, Nitrile rubber. Penetration time of glove material: Gloves resistance is not critical when the product is handled according to the instructions for use.
Safety glasses recommended.
Face mask - recommended.
Laboratory coat.
No special measures are required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in accordance with the recommended storage conditions.
None known.
Contact with acids may liberate trace amounts of toxic gas (hydrazoic acid). Hazardous polymerisation will not occur.
Concentrated acids, heavy metals, metallic salts.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The product does not contain significant quantities of ingredients that are environmentally toxic.
12.2 Persistence and degradability
The product is unlikely to persist in the environment.
12.3 Bioaccumulative potential
None anticipated.
12.4 Mobility in soil
The product is predicted to have moderate mobility in soil.
12.5 Results of PBT and vPvB assessment
The substance is not applicable for PBT and vPvB assessment.
12.6 Other adverse effects
Not applicable.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as potentially biohazardous waste and in compliance with anti-pollution and other laws of the country concerned.
Dispose of as potentially biohazardous waste and in compliance with anti-pollution and other laws of the country concerned. To ensure compliance we recommend that you contact the relevant (local) authorities and/or an approved waste-disposal company for information.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Determine™ HIV-1/2 Ag/Ab Combo Controls, HIV-1 Control & HIV-2 Control?
The signal word is no signal word.
What is the physical form of Determine™ HIV-1/2 Ag/Ab Combo Controls, HIV-1 Control & HIV-2 Control?
Determine™ HIV-1/2 Ag/Ab Combo Controls, HIV-1 Control & HIV-2 Control is a liquid appearing as liquid with pale yellow. color. It has no odour. odor.
What is Determine™ HIV-1/2 Ag/Ab Combo Controls, HIV-1 Control & HIV-2 Control used for?
In vitro diagnostic reagent. For professional use only.
What is the melting point of Determine™ HIV-1/2 Ag/Ab Combo Controls, HIV-1 Control & HIV-2 Control?
The melting point is Not determined. and the boiling point is Not determined..