Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethylenediaminetetraacetic acid, disodium salt dihydrate
- Product Code
- AC327200000, AC327200025, AC327201000, AC327205000
- Synonyms
- (Ethylenedinitrilo)tetraacetic acid, disodium salt dihydrate; Disodium edetate dihydrate; EDTA, disodium salt dihydrate
Regulatory Identifiers
- CAS Number
- 6381-92-6 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
distributor
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Acros Organics
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
No information available
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Should not be released into the environment. See Section 12 for additional Ecological Information.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid disodium salt solution
UFI: M822-N6KG-A99H-N19E
Ethylenediaminetetraacetic acid calcium disodium salt hydrate
CAS: 304695-78-1
Ethylenediaminetetraacetic acid trisodium salt hydrate
CAS: 85715-60-2
Ethylenediaminetetraacetic acid dipotassium salt dihydrate
CAS: 25102-12-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid ingestion and inhalation. Avoid dust formation. Do not get in eyes, on skin, or on clothing.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation, especially in confined areas.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particulates filter conforming to EN 143.
Wear appropriate protective gloves and clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Incompatible products. Excess heat. Avoid dust formation.
Strong oxidizing agents
Carbon monoxide (CO), Carbon dioxide (CO₂)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and Degradability
Soluble in water; persistence is unlikely based on information available.
Bioaccumulation/ Accumulation
No information available.
12.4 Mobility in soil
12.3 Bioaccumulative potential
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ethylenediaminetetraacetic acid, disodium salt dihydrate known by?
Ethylenediaminetetraacetic acid, disodium salt dihydrate is also known as: (Ethylenedinitrilo)tetraacetic acid, disodium salt dihydrate; Disodium edetate dihydrate; EDTA, disodium salt dihydrate
What is the hazard signal word for Ethylenediaminetetraacetic acid, disodium salt dihydrate?
The signal word is warning.
What is the physical form of Ethylenediaminetetraacetic acid, disodium salt dihydrate?
Ethylenediaminetetraacetic acid, disodium salt dihydrate is a solid with white color. It has odorless odor.
What is Ethylenediaminetetraacetic acid, disodium salt dihydrate used for?
Laboratory chemicals.
What are the hazard statements for Ethylenediaminetetraacetic acid, disodium salt dihydrate?
This substance has 2 hazard statements:
- H332: Harmful if inhaled
- H372: May cause damage to organs through prolonged or repeated exposure
What is the melting point of Ethylenediaminetetraacetic acid, disodium salt dihydrate?
The melting point is 252 °C / 485.6 °F and the boiling point is No information available.