Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ChloroChek® Reagent, Gelatin solution
- Product Form
- Mixture
- Product Code
- SS-248GS
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In-Vitro laboratory reagent or component
Manufacturers & Suppliers
ELITechGroup Inc.
manufacturer
370 West 1700 South, Logan, UT, Cache, 84321, USA
+1 (435) 752-6011
http://www.elitechgroup.com
Emergency Contacts
InfoTrac Emergency Response
1-800-535-5053
InfoTrac Emergency Response
+1 352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol | 64-17-5 | 25 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest.
If irritation persists, consult a doctor/medical service. Wash with water and soap.
Rinse eyes with water as a precaution. Obtain medical attention if pain, blinking or redness persists.
If you feel unwell, seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment.
Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
ChloroChek® Reagent, Buffer solution
---
ChloroChek® Standard Solution, 100 mmol/L
---
Collagen Reagent
---
ClinChek® Plasma Control, lyophil., for Amino Acids (by Amino Acid Analyser (AAA)), Level I
---
ClinChek® Serum Control, lyophil., for Vitamins, Level II
---
ClinChek® Serum Control, lyophil., for Methylmalonic Acid, Level I, II
---
ClinChek® Urine Control, lyophil., for 5-ALA, PBG, Level I
---
ClinChek® Serum Control, lyophil., for Vitamins, Level I
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe normal hygiene standards. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Keep container closed when not in use.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Type: Disposable gloves, Material: Butyl rubber, Permeation: >480 minutes, Thickness: 0.7 mm; Type: Disposable gloves, Material: Nitrile rubber, Permeation: >120 minutes, Thickness: 0.11 mm
Wear eye protection.
Respiratory protection not required in normal conditions
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
The product is non-reactive under normal conditions of use, storage and transport.
Not established.
None under recommended storage and handling conditions (see section 7).
No further relevant information available.
No hazardous decomposition products known at room temperature.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment.
12.2. Persistence and degradability
Not established.
12.3. Bioaccumulative potential
Not established.
12.4. Mobility in soil
12.5. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ChloroChek® Reagent, Gelatin solution?
The signal word is no signal word.
What is the physical form of ChloroChek® Reagent, Gelatin solution?
ChloroChek® Reagent, Gelatin solution is a liquid appearing as liquid with red color. It has aromatic odor.
What is the solubility of ChloroChek® Reagent, Gelatin solution?
Miscible with water.
What is ChloroChek® Reagent, Gelatin solution used for?
In-Vitro laboratory reagent or component
What is the melting point of ChloroChek® Reagent, Gelatin solution?
The melting point is Not applicable and the boiling point is No data available.