Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ampicillin (sodium salt)
- Product Code
- 14417
- Synonyms
- (2S,5R,6R)-6-[[(2R)-2-amino-2-phenylacetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylic acid, monosodium salt
Regulatory Identifiers
- CAS Number
- 69-52-3 Check regulations →
- EC Number
- 200-708-1 Check regulations →
Identified Uses
This product is for research use - Not for human or veterinary diagnostic or therapeutic use.
Manufacturers & Suppliers
Cayman Chemical Co.
manufacturer
1180 E. Ellsworth Rd. Ann Arbor, MI 48108 USA
+1 (734) 971-3335
Emergency Contacts
Emergency Contact
+1 (734) 971-3335
Emergency Contact
800-424-9300
Emergency Contact
703-741-5970
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ampicillin (sodium salt) EC: 200-708-1 | 69-52-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire fighting measures that suit the environment.
A solid water stream may be inefficient.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to section 13.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Keep container tightly closed. Store in accordance with information listed on the product insert. Keep receptacle tightly sealed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
oxidizing agents
carbon oxides, nitrogen oxides, sodium oxides, sulfur oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
No further relevant information available regarding aquatic toxicity.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Mobility in soil
Results of PBT and vPvB assessment
The substance is not considered PBT or vPvB.
Other adverse effects
The product is classified as slightly hazardous for water (Water hazard class 1). It should not be allowed to reach ground water, water courses, or sewage systems in undiluted form or large quantities.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage.
Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ampicillin (sodium salt) known by?
Ampicillin (sodium salt) is also known as: (2S,5R,6R)-6-[[(2R)-2-amino-2-phenylacetyl]amino]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylic acid, monosodium salt
What is the hazard signal word for Ampicillin (sodium salt)?
The signal word is danger.
What is the physical form of Ampicillin (sodium salt)?
Ampicillin (sodium salt) is a solid with not determined. color. It has characteristic odor.
What is the solubility of Ampicillin (sodium salt)?
DMF: 20 mg/ml; DMSO: 16 mg/ml; Ethanol: 2 mg/ml; PBS (pH 7.2): 10 mg/ml
What is Ampicillin (sodium salt) used for?
This product is for research use - Not for human or veterinary diagnostic or therapeutic use.
What are the hazard statements for Ampicillin (sodium salt)?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Ampicillin (sodium salt)?
The melting point is Undetermined. and the boiling point is Undetermined..