Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base)
- Product Code
- LGCAMP1122.00-01
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- UQKJ-50U9-X00A-8AT3
Identified Uses
Laboratory use
Uses advised against
No information available
Manufacturers & Suppliers
LGC Limited
manufacturer
Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM
+44 (0) 20 8943 7000
http://www.lgcstandards.com
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-741-5970
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methanol EC: 200-659-6 | 67-56-1 | 80 - 100% | Yes |
| Duloxetine Hydrochloride EC: 603-962-5 | 136434-34-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. IF exposed or concerned: Get medical advice/attention. If breathing has stopped, give artificial respiration. Get medical attention immediately. Immediate medical attention is required. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.
Symptoms: Coughing and/ or wheezing. Difficulty in breathing.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical advice/attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Get immediate medical advice/attention.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical advice/attention.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.
Do not scatter spilled material with high pressure water streams.
Risk of ignition. Keep product and empty container away from heat and sources of ignition.
In the event of fire, cool tanks with water spray.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away and upwind of spill/leak. Do not touch or walk through spilled material.
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Citalopram Hydrobromide 1.0 mg/ml in Methanol
UFI: U5VP-40UU-H00X-X2XN
Venlafaxine Hydrochloride 1.0 mg/ml in Methanol
UFI: 39EJ-90C9-N004-KU31
Clomipramine Hydrochloride 1.0 mg/ml in Methanol
UFI: H95Q-T00X-000D-18QG
Trazodone HCl (1.0 mg/ml) (as free base) in Methanol
---
Nortriptyline Hydrochloride 1.0 mg/ml in Methanol
---
Sertraline Hydrochloride 1.0 mg/ml in Methanol
UFI: KHYN-50M0-W00K-X59V
4-Methylethcathinone Hydrochloride (1.0 mg/ml) (as free base) in Methanol
---
Amitriptyline Hydrochloride 1.0 mg/ml in Methanol
UFI: RKKN-T0NU-A00S-YQ9W
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse. Do not breathe vapour or mist. In case of insufficient ventilation, wear suitable respiratory equipment. Handle product only in closed system or provide appropriate exhaust ventilation. Do not eat, drink or smoke when using this product.
Please refer to the manufacturer's certificate for specific storage and transport temperature conditions. Keep containers tightly closed in a dry, cool and well-ventilated place.
Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Do not breathe vapour or mist.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective butyl rubber gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Wear suitable gloves. Impervious gloves.
Avoid contact with eyes. Wear safety glasses with side shields (or goggles). Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
Heat, flames and sparks. Excessive heat.
None known based on information supplied.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.4. Mobility in soil
No information available.
12.5. Results of PBT and vPvB assessment
The substance is not PBT / vPvB. PBT assessment does not apply. Further information relevant for the PBT assessment is necessary.
12.6. Endocrine disrupting properties
No information available.
12.7. Other adverse effects
No information available.
12.1. Toxicity
12.1 Toxicity
12.2 Persistence and degradability
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Should not be released into the environment. Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1230
- Shipping Name
- Methanol mixture
- Transport Class
- 3
- Packing Group
- II
279
ERG Code 3L
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This safety data sheet was created pursuant to the requirements of: Regulation (EC) No. 1907/2006 and Regulation (EC) No. 1272/2008
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base)?
The signal word is danger.
What is the physical form of Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base)?
Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base) is a liquid .
What is Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base) used for?
Laboratory use
What are the hazard statements for Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base)?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour
- H301: Toxic if swallowed
- H311: Toxic in contact with skin
- H331: Toxic if inhaled
- H370: Causes damage to organs
What is the melting point of Duloxetine Hydrochloride 1.0 mg/ml in Methanol (as free base)?
The melting point is -98 °C and the boiling point is 64.7 °C.