NextSDS Logo
Safety Data Sheet EN

IFA Positive and Negative Controls

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
IFA Positive and Negative Controls
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Diagnostic Test Component

Manufacturers & Suppliers

Zeus Scientific, Inc. logo

Zeus Scientific, Inc.

manufacturer

200 Evans Way, Branchburg, NJ 08876, USA

908-526-3744

http://www.zeusscientific.com

Emergency Contacts

Emergency Contact

908-526-3744

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sodium azide 26628-22-8 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air and keep at rest in a position comfortable for breathing. Obtain medical attention if breathing difficulty persists.

Symptoms: Overexposure may be irritating to the respiratory system.

Skin contact

Rinse immediately with plenty of water. Obtain medical attention if irritation develops or persists.

Symptoms: Contact during a long period may cause slight irritation.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Obtain medical attention.

Symptoms: Direct contact with the eyes is likely irritating.

Ingestion

Do NOT induce vomiting. Rinse mouth. If a large amount is swallowed call a POISON CENTER or doctor.

Symptoms: Ingestion is not likely to be harmful or have adverse effects.

Immediate Medical Attention

Obtain medical attention if breathing difficulty persists (inhalation). Obtain medical attention if irritation develops or persists (skin). Obtain medical attention (eye). If a large amount is swallowed call a POISON CENTER or doctor (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media appropriate for surrounding fire.

Unsuitable media

Do not use a heavy water stream. Use of heavy stream of water may spread fire.

Specific hazards

Fire Hazard: Not considered flammable but may burn at high temperatures. Explosion Hazard: Product is not explosive. Reactivity: Hazardous reactions will not occur under normal conditions.

Instructions

Use water spray or fog for cooling exposed containers.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Stop leak if safe to do so. Eliminate ignition sources. Ventilate area.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Clean up spills immediately and dispose of waste safely. Absorb and/or contain spill with inert material, then place in suitable container.

Materials: inert material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety procedures.

Storage

Store in a dry, cool and well-ventilated place. Keep container closed when not in use. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure all national/local regulations are observed.

Hands

In case of repeated or prolonged contact wear gloves.

Eyes

In case of splash hazard: chemical goggles or safety glasses.

Respiratory

If exposure limits are exceeded or irritation is experienced, approved respiratory protection should be worn.

Skin/Body

Materials for Protective Clothing: Chemically resistant materials and fabrics. Wear suitable protective clothing.

Environmental

Do not allow the product to be released into the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Not available
Colour
---
Colour Intensity
---
Form
---
Odor
Not available
Odor Threshold
Not available
Ph
Not available
Melting Point
Not available
Boiling Point
Not available
Flash Point
Not available
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available
Vapor Pressure
Not available
Vapor Density
---
Relative Density
Not available
Bulk Density
---
Density
---
Flammability
Not available
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not available
Kinematic Viscosity
Not available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended handling and storage conditions (see section 7).

Reactivity

Hazardous reactions will not occur under normal conditions.

Hazardous reactions

Hazardous polymerization will not occur.

Avoid

Direct sunlight. Extremely high or low temperatures. Incompatible materials.

Incompatible

Strong acids. Strong bases. Strong oxidizers.

Decomposition

Thermal decomposition generates: Carbon oxides (CO, CO2).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

| Sodium azide (26628-22-8) | | | --- | --- | | LC50 Fish 1 | 0.8 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss) | | LC 50 Fish 2 | 0.7 mg/l (Exposure time: 96 h - Species: Lepomis macrochirus) |

12.2. Persistence and Degradability

Not available

12.3. Bioaccumulative Potential

Not available

12.4. Mobility in Soil

Not available

12.5. Other Adverse Effects

Other Information: Avoid release to the environment.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of waste material in accordance with all local, regional, national, provincial, territorial and international regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for IFA Positive and Negative Controls?

The signal word is no signal word.

What is the physical form of IFA Positive and Negative Controls?

IFA Positive and Negative Controls is a liquid appearing as not available . It has not available odor.

What is the solubility of IFA Positive and Negative Controls?

Not available

What is IFA Positive and Negative Controls used for?

Diagnostic Test Component

What is the melting point of IFA Positive and Negative Controls?

The melting point is Not available and the boiling point is Not available.