Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®
- Product Code
- 24257
- Chemical Name
- Ammonium iron (II) sulphate hexahydrate
- Synonyms
- Ammonium ferrous sulphate hexahydrate, di-Ammonium iron (II) sulphate hexahydrate
Regulatory Identifiers
- CAS Number
- 7783-85-9 Check regulations →
- REACH No.
- 01-2120766164-53-XXXX
Identified Uses
General chemical reagent
Uses advised against
The product, as such or as a component of a mixture, is not intended to be used by consumers (as defined by the REACH Regulation).
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN, UK
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium iron (II) sulphate hexahydrate EC: 233-151-8 | 7783-85-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If unconscious but breathing normally, place in recovery position and seek medical advice. Seek medical advice immediately.
Symptoms: May cause respiratory irritation. Shortness of breath. Cough.
Wash off any skin contamination immediately. When in doubt or if symptoms are observed, get medical advice.
Symptoms: Irritation.
Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. Consult an ophthalmologist.
Symptoms: Irritation.
Rinse mouth thoroughly with water. Do NOT induce vomiting. Call a POISON CENTER.
Symptoms: Nausea. Vomiting. Hypocalcämie.
Immediate Medical Attention
Seek medical advice immediately.
Medical Treatment
After inhalation, immediate application of glucocorticoids (inhalative), administration of oxygen and immobilization of the affected person are indicated. If necessary, all further measures of pulmonary edema prophylaxis. After skin contact: If necessary, treat skin irritations with a dermatocorticoid foam. After eye contact: Treat symptomatically. After ingestion: After ingestion of large amounts, immediate gastric lavage in intubation should be considered.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder, Carbon dioxide (CO2), Dry sand, Nitrogen.
Water spray, Full water jet.
Non-combustible solids. Substance is non-flammable. Toxic if swallowed. Toxic in contact with skin. Toxic if inhaled.
Adapt fire and explosion protection measures to the combustible substances in the area.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove victim out of the danger area. First Aid, decontamination, treatment of symptoms.
Avoid release to the environment.
Take up mechanically, placing in appropriate containers for disposal.
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®
CAS: 7783-85-9
Iron (III) chloride hexahydrate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 10025-77-1
Ammonium acetate AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 631-61-8
Magnesium sulphate heptahydrate AnalaR NORMAPUR®
CAS: 10034-99-8
Potassium hexacyanoferrate (III) AnalaR NORMAPUR®
CAS: 13746-66-2
Ammonium thiocyanate AnalaR NORMAPUR® Reag. Ph. Eur. analytical reagent
CAS: 1762-95-4
Ammonium iron (II) sulfate hexahydrate
CAS: 7783-85-9
Ammonium iron(II) sulfate hexahydrate
CAS: 7783-85-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Avoid substance contact. Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke.
Store in a dry place. Store in a closed container.
Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.
Usual measures for fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 in the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,12 mm Breakthrough time: > 480 min Recommended glove articles: VWR 112-0998 By long-term hand contact: Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,38 mm Breakthrough time: > 480 min Recommended glove articles: VWR 112-3717 / 112-1381
Eye glasses with side protection DIN-/EN-Norms EN 166 Recommendation: VWR 111-0432
Usually no personal respirative protection necessary. Required when dusts are generated. Generation/formation of dust Suitable respiratory protection apparatus: Filtering Half-face mask (EN 149) Recommendation: VWR 111-0451 Suitable material: P3 Recommendation: VWR 111-0244
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
This material is non-reactive under normal conditions.
Reaction with: Oxidising agent, strong; Acids.
No further relevant information available.
No further relevant information available.
No known hazardous decomposition products. Decomposition products in case of fire: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT/vPvB assessment
The substance does not meet the PBT/vPvB criteria of REACH, Annex XIII.
12.6 Endocrine disrupting properties
The substance does not have endocrine disrupting properties with respect to the environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR® known by?
Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR® is also known as: Ammonium ferrous sulphate hexahydrate, di-Ammonium iron (II) sulphate hexahydrate
What is the hazard signal word for Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®?
The signal word is warning.
What is the physical form of Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®?
Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR® is a solid with light green color. It has no data available odor.
What is Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR® used for?
General chemical reagent
What are the hazard statements for Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Ammonium iron (II) sulphate hexahydrate AnalaR NORMAPUR®?
The melting point is 110 °C and the boiling point is no data available.