Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ClinRep® Sample Preparation Columns for Metanephrines in Urine
- Product Code
- 4020
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for in-vitro diagnostic use
Manufacturers & Suppliers
RECIPE Chemicals + Instruments GmbH
manufacturer
Dessauerstr. 3, 80992 Munich
+49 (0)89 547081-0
http://www.recipe.de
Emergency Contacts
24-h-Emergency Phone Number
+49 / (0)700 24112112 (RCR)
Mon - Sun 12:00 AM - 11:59 PM
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hazardous ingredients, Consideration of other advice: none
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, BC-powder, Carbon dioxide (CO2)
Water jet
Fight fire with normal precautions from a reasonable distance. Co-ordinate firefighting measures to the fire surroundings.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder
Materials: sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
ClinRep® Eluting Reagent E for Metanephrines in Urine
---
ClinRep® Stabilising Reagent S for Metanephrines in Urine
---
ClinRep® Diluting Solution D for Metanephrines in Urine
---
ClinRep® Washing Solution W for Metanephrines in Urine
---
ClinCal® Urine Calibrator, lyophil., for Metanephrines
---
ClinChek® Urine Control, lyophil., for Nicotine and Metabolites, Level I
---
ClinChek® Urine Control, lyophil., for Nicotine and Metabolites, Level II
---
ClinChek® Urine Control, lyophil., for Biogenic Amines, Level I, II
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Protect from sunlight. Protect from moisture. Protect against external exposure, such as frost.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
There is no additional information.
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
Data are not available.
12.3 Bioaccumulative potential
Data are not available.
12.4 Mobility in soil
Data are not available.
12.5 Results of PBT and vPvB assessment
The substance does not contain PBT or vPvB substances at a concentration of 0.1% or greater.
12.6 Endocrine disrupting properties
Does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ClinRep® Sample Preparation Columns for Metanephrines in Urine?
The signal word is no signal word.
What is the physical form of ClinRep® Sample Preparation Columns for Metanephrines in Urine?
ClinRep® Sample Preparation Columns for Metanephrines in Urine is a liquid (suspension) with white color. It has characteristic odor.
What is the solubility of ClinRep® Sample Preparation Columns for Metanephrines in Urine?
not applicable (suspension)
What is ClinRep® Sample Preparation Columns for Metanephrines in Urine used for?
Product for in-vitro diagnostic use
What is the melting point of ClinRep® Sample Preparation Columns for Metanephrines in Urine?
The melting point is not determined and the boiling point is 99.97 °C at 1 atm (calculated value, referring to a component of the mixture).