R1

If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

If on skin, rinse well with water.

Symptoms: May cause an allergic skin reaction.

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

High volume water jet

No information available.

Standard procedure for chemical fires.

Use personal protective equipment. Refer to protective measures listed in sections 7 and 8.

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

Materials: sand, silica gel, acid binder, universal binder, sawdust

Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.

Keep container tightly closed in a dry and well-ventilated place.

Wash hands before breaks and at the end of workday.

Normal measures for preventive fire protection.

No data available

In case of full contact: Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0.11 mm. In case of contact through splashing: Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0.11 mm. Remarks : Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Eye wash bottle with pure water; Tightly fitting safety goggles

In the case of vapour formation use a respirator with an approved filter.

Impervious clothing; Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Stable under normal conditions.

No dangerous reaction known under conditions of normal use.

No decomposition if stored and applied as directed.

No data available

Strong oxidizing agents

No hazardous decomposition products are known.

Send to a licensed waste management company.

Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container.