Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ECO-D
- Product Code
- 05907543190
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals, Refer to product literature for further details.
Manufacturers & Suppliers
Roche Diagnostics Limited
national supplier
Charles Avenue, Burgess Hill, RH15 9RY West Sussex, United Kingdom
+44 1444 256000
Emergency Contacts
Roche Diagnostics Ltd.
+44 (0)808 100 1920
Roche Diagnostics Ltd.
1800 409 564
NPIS
+44 344 892 0111
NHS Direct in Wales
111
NHS Direct in Wales
+44 845 4647111
NHS 24
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Decanaminium, N-decyl-N,N-dimethyl-, hexanedioate (2:1) | 210420-85-2 | 5 - 10% | Yes |
| Secondary alcohols, C12-14, ethoxylated | 84133-50-6 | 3 - 10% | Yes |
| N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine EC: 219-145-8 | 2372-82-9 | 3 - 5% | Yes |
| N-Laurylsarcosin, sodium salt EC: 205-281-5 | 137-16-6 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: untreated wounds from corrosion of the skin heal slowly and with difficulty.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Small amounts splashed into eyes can cause irreversible tissue damage and blindness.
Clean mouth with water and drink afterwards plenty of water. Keep respiratory tract clear. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Immediate Medical Attention
Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. Take victim immediately to hospital.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to protective measures listed in sections 7 and 8.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. To avoid spills during handling keep bottle on a metal tray.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Material : Protective gloves. Remarks : Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water. Tightly fitting safety goggles. Wear face-shield and protective suit for abnormal processing problems.
Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reaction known under conditions of normal use.
Exothermic reaction with strong acids.
Do not allow to dry.
strong acids
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Toxicity data on soil indicates the product is not expected to adsorb on soil. No data available for other organisms.
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Ecotoxicology Assessment
The product is classified as very toxic to aquatic life with long lasting effects.
N-Laurylsarcosin, sodium salt
N-Laurylsarcosin, sodium salt is not expected to adsorb on soil.
Other organisms relevant to the environment
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product contains no components considered to be PBT or vPvB at levels of 0.1% or higher. The component 1-Decanaminium, N-decyl-N,N-dimethyl-, hexanedioate (2:1) is assessed as not PBT or vPvB.
12.6 Endocrine disrupting properties
The product and its components do not contain substances with endocrine disrupting properties. The product is classified as very toxic to aquatic life with long lasting effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Send to a licensed waste management company.
The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2735
- Shipping Name
- AMINES, LIQUID, CORROSIVE, N.O.S. (N-(3-aminopropyl)-N-dodecylpropane-1,3-diamine)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ECO-D?
The signal word is danger.
What is the physical form of ECO-D?
ECO-D is a liquid appearing as liquid with colourless color. It has characteristic odor.
What is ECO-D used for?
Laboratory chemicals, Refer to product literature for further details.
What are the hazard statements for ECO-D?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of ECO-D?
The melting point is No data available and the boiling point is > 100 °C.