NextSDS Logo
Safety Data Sheet EN

Ctr Level 1

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ctr Level 1

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals, Refer to product literature for further details.

Manufacturers & Suppliers

R

Roche Diagnostics Deutschland GmbH

national supplier

Sandhoferstrasse 116, 68305 Mannheim, Deutschland

+496217590

Emergency Contacts

Central Works Security, Roche Diagnostics GmbH

+49(0)621-759-2203

Centre for detoxification, Mainz

+49(0)6131-19240

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS09 - Environmental hazard

GHS09

Hazard Statements

H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P391 Collect spillage.
P501 Dispose of contents/ container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
disodium dihydrogen ethylenediaminetetraacetate EC: 205-358-3 139-33-3 1 - 10% Yes
tetradonium bromide EC: 214-291-9 1119-97-7 0.25 - 1% Yes

Acute oral toxicity: 390 mg/kg

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Skin contact

Wash off with soap and water.

Eye contact

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Ingestion

Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

High volume water jet

Firefighter Protection

Wear self-contained breathing apparatus for firefighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Cleanup methods

Keep in suitable, closed containers for disposal.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Smoking, eating and drinking should be prohibited in the application area.

Storage

Keep container tightly closed in a dry and well-ventilated place.

Hygiene

Wash hands before breaks and at the end of workday.

Fire prevention

Provide appropriate exhaust ventilation at places where dust is formed.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Material: In case of contact through splashing: Nitrile rubber, Break through time: > 30 min, Glove thickness: > 0,11 mm. Material: In case of full contact: butyl-rubber, Break through time: > 480 min, Glove thickness: > 0,4 mm. Remarks: Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. This recommendation is only valid for the product mentioned in the safety data sheet and provided by us and for the application specified by us. The suitability for a specific workplace should be discussed with the producers of the protective gloves. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Eyes

Use eye protection according to EN 166. Eye wash bottle with pure water. Tightly fitting safety goggles

Skin/Body

Dust impervious protective suit. Choose body protection according to the amount and concentration of the dangerous substance at the work place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
light yellow
Colour Intensity
---
Form
solid, (lyophilised)
Odor
characteristic
Odor Threshold
Not applicable
Ph
6,0 - 8,0
Melting Point
No data available
Boiling Point
No data available
Flash Point
does not flash
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
No data available
Vapor Density
---
Relative Density
---
Bulk Density
1.000 - 2.000 kg/m3
Density
---
Flammability
---
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
No data available
Solubility In Water
completely soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable
Kinematic Viscosity
Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No decomposition if stored and applied as directed.

Avoid

No data available

Incompatible

No data available

Decomposition

No hazardous decomposition products are known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.3 Bioaccumulative potential

Bioaccumulation : Bioconcentration factor (BCF): 750 Remarks: Does not bioaccumulate. Partition coefficient: n-octanol/water : log Pow: 2,2 (20 °C)

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

Assessment : This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

12.1 Toxicity

Product: Ecotoxicology Assessment Toxicity Data on Soil : Not expected to adsorb on soil. Other organisms relevant to the environment : No data available Components:

Not expected to adsorb on soil.

12.1 Toxicity

disodium dihydrogen ethylenediaminetetraacetate: Toxicity to fish : LC50 (Lepomis macrochirus (Bluegill sunfish)): > 100 mg/l Exposure time: 96 h Test Type: static test Remarks: nominal concentration Based on data from similar materials Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 100 mg/l Exposure time: 48 h Test Type: static test Method: DIN 38412 Remarks: nominal concentration Toxicity to algae/aquatic plants : ErC50 (Pseudokirchneriella subcapitata (green algae)): > 100 mg/l Exposure time: 72 h Test Type: static test Remarks: Based on data from similar materials Toxicity to microorganisms : EC20 (activated sludge): > 500 mg/l Exposure time: 30 min Method: OECD Test Guideline 209 Toxicity to fish (Chronic toxicity) : NOEC: >= 36,9 mg/l Exposure time: 35 d Species: Danio rerio (zebra fish) Test Type: flow-through test Method: OECD Test Guideline 210 Remarks: Based on data from similar materials

12.1 Toxicity

Toxicity to fish : LC50 (Danio rerio (zebra fish)): 1,81 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): 0,022 mg/l Exposure time: 48 h Toxicity to algae/aquatic plants : EC50 (Pseudokirchneriella subcapitata (green algae)): 0,00538 mg/l Exposure time: 72 h NOEC (Pseudokirchneriella subcapitata (green algae)): 0,0013 mg/l Exposure time: 72 h M-Factor (Acute aquatic toxicity) : 100 Toxicity to microorganisms : EC50 (Natural microorganism): 19 mg/l Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC: 0,023 mg/l Exposure time: 21 d Species: Daphnia magna (Water flea) M-Factor (Chronic aquatic toxicity) : 1

12.2 Persistence and degradability

12.2 Persistence and degradability

Components: disodium dihydrogen ethylenediaminetetraacetate: Biodegradability : Test Type: aerobic Result: Not readily biodegradable. Method: OECD Test Guideline 301D Remarks: Based on data from similar materials

12.2 Persistence and degradability

Components: tetradonium bromide: Biodegradability : Result: Readily biodegradable.

Readily biodegradable.

12.3 Bioaccumulative potential

Components: disodium dihydrogen ethylenediaminetetraacetate: Bioaccumulation : Species: Lepomis macrochirus (Bluegill sunfish) Exposure time: 28 d Bioconcentration factor (BCF): 1,8 Remarks: Bioaccumulation is unlikely. Partition coefficient: n-octanol/water : log Pow: -4,3 (25 °C) pH: 4,5

12.6 Endocrine disrupting properties

Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.

The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.

12.7 Other adverse effects

An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects. Harmful to aquatic life with long lasting effects.

An environmental hazard cannot be excluded in the event of unprofessional handling or disposal. The product is classified as very toxic to aquatic life with long lasting effects.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Tetradonium bromide)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ctr Level 1?

The signal word is warning.

What is the physical form of Ctr Level 1?

Ctr Level 1 is a solid with light yellow color. It has characteristic odor.

What is Ctr Level 1 used for?

Laboratory chemicals, Refer to product literature for further details.

What are the hazard statements for Ctr Level 1?

This substance has 1 hazard statement:

  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Ctr Level 1?

The melting point is No data available and the boiling point is No data available.