Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Amalfi Coast (R) 10% (non-hazardous base)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Scented Candles Wax Melts
Manufacturers & Suppliers
NI Candle Supplies Ltd
manufacturer
Unit 7A Milltown Industrial Estate Greenan Road Warrenpoint BT34 3FN
+44 28 4177 4362
Emergency Contacts
Emergency Contact
+44 7310 159147
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,6-dimethyloct-7-en-2-ol EC: 242-362-4 | 18479-58-8 | 1 - 5% | Yes |
| Linalyl acetate EC: 204-116-4 | 115-95-7 | 1 - 5% | Yes |
| Limonene EC: 227-813-5 | 5989-27-5 | 0.1 - 1% | Yes |
| Benzyl benzoate EC: 204-402-9 | 120-51-4 | 0.1 - 1% | Yes |
| Acetyl Hexamethyl Tetralin (AHTN) EC: 244-240-6 | 21145-77-7 | 0.1 - 1% | Yes |
| Acetyl cedrene EC: 251-020-3 | 32388-55-9 | 0.1 - 1% | Yes |
| Linalool EC: 201-134-4 | 78-70-6 | 0.1 - 1% | Yes |
| Hexamethylindanopyran EC: 214-946-9 | 1222-05-5 | 0.1 - 1% | Yes |
| Citral EC: 226-394-6 | 5392-40-5 | 0.1 - 1% | Yes |
| alpha-Isomethyl ionone EC: 204-846-3 | 127-51-5 | 0.1 - 1% | Yes |
| Allyl amyl glycolate EC: 916-328-0 | --- | 0.1 - 1% | Yes |
| Citronellol EC: 203-375-0 | 106-22-9 | 0.1 - 1% | Yes |
Substances with Community workplace exposure limits: Not Applicable Substances that are persistent, bioaccumulative and toxic or very persistent and very bioaccumulative, greater than 0.1%: Not Applicable
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure site to fresh air, keep at rest, and obtain medical attention.
IF ON SKIN: Wash with plenty of soap and water.
Symptoms: May cause an allergic skin reaction.
Flush immediately with water for at least 15 minutes. Contact physician if symptoms persist.
Rinse mouth with water and obtain medical attention.
Immediate Medical Attention
None expected
Medical Treatment
None expected
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, Dry chemical, Foam.
In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds.
Firefighter Protection
In case of insufficient ventilation, wear suitable respiratory equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8.
Keep away from drains, surface and ground water, and soil.
Related Products
Similar products with comparable safety profiles
Black Amber & Lavender (R) 10% (non-hazardous base)
---
Ocean Breeze 10% (non-hazardous base)
---
Thyme Olive & Bergamot (R) 10% (non-hazardous base)
---
Petrichor 10% (non-hazardous base)
---
Midnight Poppy 10% (non-hazardous base)
---
Xmas Tree 10% (non-hazardous base)
---
Fresh Cut Grass 10% (non-hazardous base)
---
Ammonium hydroxide, 25% NH₃
CAS: 1336-21-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Use personal protective equipment as required. Use in accordance with good manufacturing and industrial hygiene practices. Use in areas with adequate ventilation. Do not eat, drink or smoke when using this product.
Store in a well-ventilated place. Keep container tightly closed. Keep cool.
Use in accordance with good manufacturing and industrial hygiene practices. Do not eat, drink or smoke when using this product.
Keep away from heat, sparks, open flames and hot surfaces. - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Under normal conditions of use and where adequate ventilation is available to prevent build up of excessive vapour, this material should not require special engineering controls. However, in conditions of high or prolonged use, or high temperature or other conditions which increase exposure, the following engineering controls can be used to minimise exposure to personnel: a) Increase ventilation of the area with local exhaust ventilation. c) Use closed systems for transferring and processing this material.
Wear protective gloves
Wear eye protection/face protection
Personnel can use an approved, appropriately fitted respirator with organic vapour cartridge or canisters and particulate filters.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Good stability under normal storage conditions.
Presents no significant reactivity hazard, by itself or in contact with water.
Not expected under normal conditions of use.
Avoid extreme heat.
Avoid contact with strong acids, alkalis or oxidising agents.
Not expected.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity:
12.2 Persistence and degradability:
12.3 Bioaccumulative potential:
12.4 Mobility in soil:
12.5 Results of PBT and vPvB assessment
The substance does not meet the PBT/vPvB criteria of REACH, annex XIII.
12.6 Other adverse effects:
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Limonene, Acetyl Hexamethyl Tetralin (AHTN))
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
None additional
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Amalfi Coast (R) 10% (non-hazardous base)?
The signal word is warning.
What is the solubility of Amalfi Coast (R) 10% (non-hazardous base)?
Not determined
What is Amalfi Coast (R) 10% (non-hazardous base) used for?
Scented Candles Wax Melts
What are the hazard statements for Amalfi Coast (R) 10% (non-hazardous base)?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Amalfi Coast (R) 10% (non-hazardous base)?
The melting point is Not determined and the boiling point is Not determined.