NextSDS Logo
Safety Data Sheet EN

Hyspin AWS 46

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Hyspin AWS 46
Product Code
456617-US02, 456617-US03

Regulatory Identifiers

CAS Number
N/A

Identified Uses

hydraulic oil

Manufacturers & Suppliers

C

Castrol Industrial North America, Inc.

manufacturer

150 W. Warrenville Road, Naperville, IL 60563

1-800-621-2661

Emergency Contacts

CHEMTREC

1 (800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H303 Ingestion may cause gastrointestinal irritation and diarrhea.
H335 MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN IRRITATION.
Prolonged or repeated contact can defat the skin and lead to irritation and/or dermatitis.
May cause skin irritation.

Precautionary Statements

P260 In accordance with good industrial hygiene and safety work practices, airborne exposures should be controlled to the lowest extent practicable.
P264 Wash thoroughly after handling.
P271 Use only with adequate ventilation.
Avoid contact with eyes, skin and clothing.
Keep container tightly closed and sealed until ready for use.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
Base oil - highly refined --- 95 - 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air.

Skin contact

Immediately wash exposed skin with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes.

Ingestion

Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get medical attention if symptoms occur. If potentially dangerous quantities of this material have been swallowed, call a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use an extinguishing agent suitable for the surrounding fire.

Unsuitable media

Do not use water jet.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material.

Small spill

Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble or absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see section 13). Dispose of via a licensed waste disposal contractor.

Materials: non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see section 8). Do not breathe vapor or mist. Do not ingest. Avoid contact with eyes, skin and clothing.

Storage

Store in accordance with local regulations. Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see section 10). Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers.

Hygiene

Workers should wash hands and face before eating, drinking and smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless to light yellow.
Colour Intensity
---
Form
---
Odor
Mild.
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
Open cup: 215°C (419°F) [Cleveland.]
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
880 kg/m³ (0.88 g/cm³) at 15.6°C
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Insoluble in water.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Kinematic: 46 mm²/s (46 cSt) at 40°C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

Avoid all possible sources of ignition (spark or flame).

Incompatible

oxidizing materials and acids.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

No testing has been performed by the manufacturer.

12.2 Persistence and degradability

No testing has been performed by the manufacturer.

12.3 Bioaccumulative potential

No testing has been performed by the manufacturer.

12.4 Mobility in soil

No testing has been performed by the manufacturer.

12.5 Results of PBT and vPvB assessment

No testing has been performed by the manufacturer.

12.6 Endocrine disrupting properties

No testing has been performed by the manufacturer.

12.7 Other adverse effects

No testing has been performed by the manufacturer.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

Disposal

The generation of waste should be avoided or minimized wherever possible. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Hyspin AWS 46?

The signal word is warning.

What is the physical form of Hyspin AWS 46?

Hyspin AWS 46 is a liquid. with colorless to light yellow. color. It has mild. odor.

What is Hyspin AWS 46 used for?

hydraulic oil

What are the hazard statements for Hyspin AWS 46?

This substance has 4 hazard statements:

  • H303: Ingestion may cause gastrointestinal irritation and diarrhea.
  • H335: MAY CAUSE RESPIRATORY TRACT, EYE AND SKIN IRRITATION.
  • Prolonged or repeated contact can defat the skin and lead to irritation and/or dermatitis.
  • May cause skin irritation.