Hydrogen Peroxide

After inhalation: fresh air.

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

After eye contact: rinse out with plenty of water. Remove contact lenses.

After swallowing: immediately make victim drink water (two glasses at most).

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

For this substance/mixture no limitations of extinguishing agents are given.

Not combustible.

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not empty into drains.

Take up with liquid-absorbent and neutralising material. Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H', Merck Art. No. 101595)

Observe label precautions.

No metal containers. Close containers in such a way to enable internal pressure to escape (e.g. excess pressure valve). Tightly closed. Protected from light. Do not store near combustible materials. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Full contact: Material: Latex gloves, Minimum layer thickness: 0,6 mm, Break through time: 480 min, Material tested: Lapren® (KCL 706 / Aldrich Z677558, Size M). Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

Recommended Filter type: filter NO. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not empty into drains.

heat-sensitive Sensitivity to light

Has a fire-promoting effect due to release of oxygen.

Risk of explosion with: Acetaldehyde, Acetone. Exothermic reaction with: alkali hydroxides, antimony sulfide, tin (II) chloride, Sulfides, 3-BROMO-5-CHLORO-4-HYDROXYBENZALDEHYDE, nitric acid (conc.), ethanol, glycerol, Potassium hydroxide, phosphorus, metallic oxides, Sodium hydroxide, Aldehydes, nonmetals, nonmetallic oxides, strong alkalis, Amines, Acids. Risk of ignition or formation of inflammable gases or vapours with: potassium permanganate, Wood/Sawdust, vinyl acetate with Catalyst.

Heating.

Activated charcoal, Alcohols, formic acid, Ammonia, combustible substances, vinyl acetate, Organic Substances, Powdered metals, Dust, hydrazine and derivatives, hydrides, Ether, Potassium, anilines, Metallic salts, acetic acid, Acetic anhydride, Formaldehyde, furfuryl alcohol, oils, sodium, Lithium, lithium aluminium hydride, organic solvents, Magnesium, metallic oxides, Methanol, Reducing agents, Oxides of phosphorus, butanol, Sulphuric acid, alkali hydroxides, Heavy metals, Oxidizing agents, alkali salts, Alkali metals, Alkaline earth metals, iodides, peroxi compounds, Brass, organic nitro compounds, phenol.

In the event of fire: see section 5

See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.

See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.