Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Spent Copper/Aluminum Catalyst
- Chemical Name
- Copper carbonate
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Use only as an industrial chemical.
Manufacturers & Suppliers
ShoreMet LLC
manufacturer
3601 Enterprise Ave, Valparaiso, IN 46383
(219) 390-3336 x100
Emergency Contacts
CHEMTREC
(800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Basic copper carbonate | 12069-69-1 | 15 - 60% | No |
| Copper sulfide | 22205-45-4 | 10 - 40% | No |
| Aluminum oxide | 1344-28-1 | 10 - 40% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove the affected person to fresh air. Seek immediate medical attention. Do NOT perform mouth-to-mouth resuscitation unless a pocket mask equipped with a one-way valve or another proper respiratory medical device is available.
Symptoms: Dry/sore throat. Irritation of the respiratory tract and nasal mucous membranes.
For skin contact, wash immediately with soap and water. Immediately take off all contaminated clothing. Seek immediate medical attention if irritation develops or persist.
Symptoms: With continuous/repeated exposure/contact, skin rash/inflammation.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Remove contact lenses, if present and easy to do. Seek medical attention if irritation persist.
Symptoms: Slight irritation.
If the material is swallowed, get immediate medical attention or advice—do not induce vomiting. Have victim rinse mouth thoroughly with water, if conscious. Give one to two glasses of water or milk. Never give anything by mouth to an unconscious victim. Do not use mouth-to-mouth if victim has ingested the substance. Induce artificial respiration with a proper respiratory medical device.
Symptoms: Gastrointestinal complaints, vomiting, abdominal pain and/or diarrhea.
Immediate Medical Attention
Depending on the victim’s condition: doctor or hospital. Seek immediate medical attention if irritation develops or persist (skin). Seek immediate medical attention (inhalation/ingestion).
Medical Treatment
Treat the affected person symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, foam, carbon dioxide, or water spray.
Material is non-flammable or explosive.
Separate from mass. Eliminate oxygen.
Firefighter Protection
Firefighters should wear full protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the flow of material, if this is without risk. Contain spillages and clean-up with vacuum or conventional tools in an attempt to minimize migration use dikes or absorbents. Neutralize with citric acid or other neutralizing agent for basic liquids. Decontaminate the area. Test area with litmus paper to ensure neutralization. Ventilate the contaminated area. Place in a suitable container for recycling or disposal in accordance with local and national waste regulations.
Do not allow to enter drains or watercourses. If the product enters drains or sewers, immediately inform the local water company. Where there is contamination of streams, rivers or lakes contact local agency with responsibility for the environment.
clean-up with vacuum or conventional tools
Materials: vacuum or conventional tools
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not get this material in your eyes, on your skin or on your clothing. Do not inhale vapors or mists of this product. Use this product with adequate ventilation. Avoid release to the environment. Wash thoroughly after handling. Keep out of reach of children.
Store in a cool, dry, well-ventilated area. Store away from direct sunlight, or any source of intense heat. Store away from area where freezing is possible.
Wash thoroughly after handling.
Post warning and “NO SMOKING” signs in storage and use areas, as appropriate.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This is a stable material at normal conditions.
Not expected to occur.
Avoid extremely high or low temperatures, direct sunlight and contact with incompatible materials.
Strong acids.
Decomposition products include copper fumes, copper compounds, and carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No data available.
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
No data available.
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
treatment at a permitted facility or as advised by your local hazardous waste regulatory authority
This product, if unaltered by use, may be disposed of by treatment at a permitted facility or as advised by your local hazardous waste regulatory authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
All components are on the US EPA TSCA Inventory List. All components are on the Canadian Domestic Substances or Non-Domestic Substances Inventory Lists. Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances) substances.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Spent Copper/Aluminum Catalyst?
The signal word is warning.
What is the physical form of Spent Copper/Aluminum Catalyst?
Spent Copper/Aluminum Catalyst is a solid appearing as black powder .
What is Spent Copper/Aluminum Catalyst used for?
Use only as an industrial chemical.
What are the hazard statements for Spent Copper/Aluminum Catalyst?
This substance has 1 hazard statement:
- H302: Harmful if swallowed.