Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Decachlorobiphenyl in Hexane
- Product Code
- M-8082-1SC-WL-10ML
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory Chemical Reference Material
Manufacturers & Suppliers
AccuStandard, Inc.
manufacturer
125 Market St. New Haven, CT 06513 USA
203-786-5290
Emergency Contacts
AccuStandard, Inc.
1-203-502-7070
24 hours / 7 days a week
AccuStandard, Inc.
+801-203-502-7070
24 hours / 7 days a week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel.
Wash thoroughly with soap and water.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. (P336)
Do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention if irritation develops or persists. Seek immediate medical attention. Call a physician or poison control center immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use alcohol foam, carbon dioxide, dry chemical, or water spray when fighting fires involving this material.
Dangerous fire and explosive hazard. Vapors can travel to a source of ignition and flash back.
Water spray to cool fire-exposed containers and disperse vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear suitable protective equipment listed under Exposure Controls / Personal Protection. Eliminate any ignition sources until the area is determined to be free from explosion or fire hazards. Contain the release and eliminate its source, if this can be done without risk.
Related Products
Similar products with comparable safety profiles
Decachlorobiphenyl in Isooctane
---
2,2',3,4',5',6-Hexachlorobiphenyl in Isooctane
---
Hexachloroethane in Hexane
---
2,2',3,4,5,5'-Hexachlorobiphenyl in Isooctane
---
2,2',3,4,4',5'-Hexachlorobiphenyl in Isooctane
---
2,3,3',4',5,6-Hexachlorobiphenyl in Isooctane
---
2,2',4,4',5,5'-Hexachlorobiphenyl in Isooctane
---
3,3',4,4',5,5'-Hexachlorobiphenyl in Isooctane
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing vapors or mists. Do not get in eyes, on skin or clothing. (P262) Avoid prolonged or repeated exposure. This product should only be used by persons trained in the safe handling of hazardous chemicals. (P202)
Store in a tightly closed container. (P404) Store in a cool area away from ignition sources and oxidizers.
Store away from ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material must be handled or transferred in an approved fume hood or with equivalent ventilation. Engineering and/or administrative controls should be implemented to reduce exposure.
Protective gloves must be worn to prevent skin contact. (P280) (Nitrile or equivalent)
Use eye protection tested and approved under the appropriate government standards such as NIOSH (US) or EN 166 (EU).
If workplace exposure limit(s) of product or any component is exceeded (see TLV/PEL), or a risk assessment shows air-purifying respirators are appropriate, use of a NIOSH/MSHA approved air supplied respirator is advised. Use a full-face respirator with multi-purpose combination (US) or type A&EK (EN14387) respirator cartridges in absence of proper environmental control. Always use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur
Heat; Contact with ignition sources
Oxidizers
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.3 Bioaccumulative potential
Moderate potential to bioaccumulate
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle or incinerate at any EPA approved facility
Dispose in compliance with Federal, State and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1208
- Shipping Name
- Hexanes
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
For laboratory, research and development use only. Not for manufacturing or commercial purposes.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Decachlorobiphenyl in Hexane?
The signal word is danger.
What is the physical form of Decachlorobiphenyl in Hexane?
Decachlorobiphenyl in Hexane is a liquid appearing as clear liquid . It has characteristic odor odor.
What is Decachlorobiphenyl in Hexane used for?
Laboratory Chemical Reference Material
What are the hazard statements for Decachlorobiphenyl in Hexane?
This substance has 10 hazard statements:
- H225: Highly Flammable
- H302: Harmful if swallowed.
- H304: Aspiration hazard if swallowed - may be fatal if swallowed and enters airways.
- H312: May be harmful if absorbed through the skin.
- H315: Irritating to skin.
- H319: May be irritating to eyes.
- H332: Harmful if inhaled.
- H335: May be irritating to mucous membrane and upper respiratory system.
- H336: May cause dizziness, nausea, incoordination, or anesthesia.
- H361: Suspect reproductive hazard.
What is the melting point of Decachlorobiphenyl in Hexane?
The melting point is -95 °C (-139 °F) and the boiling point is 68 - 70 °C.