NextSDS Logo
Safety Data Sheet EN

ARCHITECT Anti-HCV Conjugate

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ARCHITECT Anti-HCV Conjugate
Product Code
1L79H

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For In Vitro Diagnostic Use

Manufacturers & Suppliers

A

Abbott Diagnostics

manufacturer

100 Abbott Park Road, Abbott Park, IL 60064-3500

1-877-4 ABBOTT

Emergency Contacts

CHEMTREC® Emergency Call Center

(800) 424-9300

24 hours/day, 7 days/week

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A H319
Aquatic Acute Cat. 2 H401
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P391 Collect spillage.
P501 Dispose of contents / container in accordance with local regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
polyethylene glycol octylphenyl ether 9002-93-1 1.0626% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from source of exposure. If irritation or signs of toxicity occur, seek medical attention.

Skin contact

Take off any clothing that the product touched. Rinse skin with running water for 15 to 20 minutes. Seek medical attention if irritation or signs of toxicity occur.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. Wash hands after handling.

Ingestion

Rinse mouth with water. If irritation or signs of toxicity occur, seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical, carbon dioxide (CO2), water spray or regular foam.

Specific hazards

There are no unique chemical or reactivity hazards that would impact firefighting decisions due to the chemicals in this product.

Instructions

Use firefighting measures that suit the environment.

Firefighter Protection

For large fires, wear appropriate heat- and flame-resistant personal protective equipment and a NFPA/NIOSH approved positive-pressure, self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop leak if possible. Keep unprotected persons away.

Small spill

Blot up small volumes of spilled or spattered product with paper towels or similar materials.

Large spill

Contain larger spills by placing absorbants around the outside edges of the spill. Absorb with any material suitable for water-based liquids - e.g. paper towels, universal sorbents, sand, diatomite, sawdust, etc.

Environmental

Prevent liquid and vapor from entering sewage system, storm drains, surface waters, and soil.

Cleanup methods

Clean the affected area.

Materials: warm water and detergent or similar cleansing agent

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes.

Storage

Store only in the original container. Store in original packaging. Refer to the package insert or product label for additional information on storage conditions for product quality.

Fire prevention

The product is not flammable.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear impervious gloves if hand contact with the material is anticipated. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. The glove material must be suitable for use in a microbiological laboratory and have a measured breakthrough time of at least 30 minutes, such as those with a Class 2 protection index per EN374 (or equivalent standard applicable in your region). NOTE: This recommendation applies only to the product stated in this Safety Data Sheet. When dissolving in or mixing with other substances, contact the supplier of approved gloves.

Eyes

Wear safety glasses or other protective eyewear. If splash potential exists, wear full face shield or goggles.

Respiratory

Normal use and storage of product - respiratory protection is not necessary if room is well ventilated. Small-volume spills (e.g. small enough to clean up with a paper towel or small sorbent pad) - respiratory protection should not be necessary if room is well ventilated. Other unusual conditions (e.g. volume spilled too big to clean up with materials in arm's reach) - Use appropriate NIOSH-approved air-purifying respirator if airborne chemical concentrations may exceed the exposure limit (if any) listed above. Hazardous Materials Emergencies or Firefighting - use NIOSH/NFPA-approved respiratory protection.

Skin/Body

Normal use: protect personal clothing from spatters and small spills. Wear a laboratory coat (or other protective clothing required by your institution). Larger spills (e.g. that can saturate cloth): wear appropriate water-repellant covering over clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Light yellow
Colour Intensity
---
Form
Liquid
Odor
Odorless
Odor Threshold
---
Ph
6.6 (at 20 °C)
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1.021 g/cm³ (8.5202 lbs/gal) at 20 °C
Flammability
Not applicable
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Product is not self-igniting.
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used and stored according to specifications.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Aquatic toxicity: No further relevant information available.

No further relevant information available.

12.5 Results of PBT and vPvB assessment

PBT: Not applicable vPvB: Not applicable

The substance is not considered PBT or vPvB.

12.7 Other adverse effects

Toxic for aquatic organisms

The product is toxic for aquatic organisms.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose in accordance with federal, state and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (polyethylene glycol octylphenyl ether)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ARCHITECT Anti-HCV Conjugate?

The signal word is warning.

What is the physical form of ARCHITECT Anti-HCV Conjugate?

ARCHITECT Anti-HCV Conjugate is a liquid with light yellow color. It has odorless odor.

What is ARCHITECT Anti-HCV Conjugate used for?

For In Vitro Diagnostic Use

What are the hazard statements for ARCHITECT Anti-HCV Conjugate?

This substance has 2 hazard statements:

  • H319: Causes serious eye irritation.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of ARCHITECT Anti-HCV Conjugate?

The melting point is Not determined and the boiling point is Not determined.