NextSDS Logo
Safety Data Sheet EN

Extran(R) MN 01 Detergent Powder

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Extran(R) MN 01 Detergent Powder
Product Code
EX0995

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Biochemical research/analysis

Uses advised against

The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient's responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.

Manufacturers & Suppliers

S

Sigma-Aldrich Inc.

manufacturer

3050 SPRUCE ST, ST. LOUIS MO 63103, UNITED STATES

+1 314 771-5765

Emergency Contacts

CHEMTREC

800-424-9300

24 Hours/day; 7 Days/week

CHEMTREC

+1-703-527-3887

24 Hours/day; 7 Days/week

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4
Skin Irrit. Cat. 2
Eye Dam. Cat. 1
Aquatic Acute Cat. 3

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H402 Harmful to aquatic life.

Precautionary Statements

P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P280 Wear protective gloves/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse.
P501 Dispose of contents/ container to an approved waste disposal plant.
IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell. Rinse mouth.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
sodium dodecyl benzenesulfonate 25155-30-0 10 - 20% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

After inhalation: fresh air.

Skin contact

Take off immediately all contaminated clothing. Rinse skin with water/ shower.

Eye contact

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

Ingestion

After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.

Immediate Medical Attention

Immediately call in ophthalmologist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Foam, Carbon dioxide (CO2), Dry powder

Unsuitable media

For this substance/mixture no limitations of extinguishing agents are given.

Specific hazards

Combustible. Fire may cause evolution of: Sulfur oxides. Development of hazardous combustion gases or vapours possible in the event of fire.

Instructions

Suppress (knock down) gases/vapors/mists with a water spray jet.

Firefighter Protection

Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid substance contact. Evacuate the danger area, observe emergency procedures, consult an expert. Observe possible material restrictions (see sections 7 and 10).

Environmental

Do not let product enter drains.

Cleanup methods

Take up dry. Clean up affected area.

—

Related Products

Similar products with comparable safety profiles

D

Detergent Powder Mix

---

D

Detergent Powder Mix

---

D

Detergent powder mix

---

D

Detergent 7 X®

---

G

Granular Laundry Detergent

---

E

EXTRA STRONG DETERGENT C20

---

E

Extran® AP 11 mildly alkaline

---

W

Wassenburg EndoHigh Detergent

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

For precautions see section 2.2.

Storage

Tightly closed. Dry.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No data available

Hands

Material : Nitrile rubber Break through time : 480 min Glove thickness : 0.11 mm Protective index : Full contact Manufacturer : KCL 741 Dermatril® L Material : Nitrile rubber Break through time : 480 min Glove thickness : 0.11 mm Protective index : Splash contact Manufacturer : KCL 741 Dermatril® L Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

Respiratory

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2 The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Skin/Body

protective clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
powder
Colour
white
Colour Intensity
---
Form
---
Odor
weak characteristic odour
Odor Threshold
No data available
Ph
7 - 9
Melting Point
---
Boiling Point
---
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not applicable
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

Hazardous reactions

Risk of explosion with: nitrates. Violent reactions possible with: Fluorine, Strong oxidizing agents, Bases, Acids

Avoid

no information available

Incompatible

No data available

Decomposition

In the event of fire: see section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Ecotoxicity

Components: sodium dodecyl benzenesulfonate: Toxicity to fish: LC50 (Oncorhynchus mykiss (rainbow trout)): 3.2 - 5.6 mg/l End point: mortality Exposure time: 96 h Test Type: static test Method: OECD Test Guideline 203 GLP: yes Toxicity to daphnia and other aquatic invertebrates: EC50 (Daphnia magna (Water flea)): 6.3 - 9.5 mg/l End point: mortality Exposure time: 48 h Test Type: static test Method: OECD Test Guideline 202 GLP: yes Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity): NOEC (Daphnia magna (Water flea)): 1.65 mg/l End point: reproduction rate Exposure time: 21 d Test Type: semi-static test Method: OECD Test Guideline 211

Persistence and degradability

Components: sodium dodecyl benzenesulfonate: Biodegradability: aerobic Concentration: 10 parts per million Result: Readily biodegradable. Biodegradation: > 75 % Exposure time: 17 d Method: OECD Test Guideline 301E

Bioaccumulative potential

Components: sodium dodecyl benzenesulfonate: Bioaccumulation: Species: Leuciscus idus melanotus Bioconcentration factor (BCF): 130 Exposure time: 3 d Concentration: 48 µg/l Method: OECD Test Guideline 305 Partition coefficient: n-octanol/water: log Pow: 1.96 (77 °F / 25 °C) pH: 7 Method: OECD Test Guideline 107

Mobility in soil

No data available

Other adverse effects

Components: sodium dodecyl benzenesulfonate: Additional ecological information: Avoid release to the environment.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Waste material must be disposed of in accordance with the national and local regulations.

Disposal

Leave chemicals in original containers. No mixing with other waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Extran(R) MN 01 Detergent Powder?

The signal word is danger.

What is the physical form of Extran(R) MN 01 Detergent Powder?

Extran(R) MN 01 Detergent Powder is a solid appearing as powder with white color. It has weak characteristic odour odor.

What is Extran(R) MN 01 Detergent Powder used for?

Biochemical research/analysis

What are the hazard statements for Extran(R) MN 01 Detergent Powder?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H402: Harmful to aquatic life.