Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cleaner
- Product Code
- BRE - 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
As Cleaner at the penetration process by colours acc. to EN ISO 3452-1 [EN 571-1] (DIN 54 152 part 1) for finding surface cracks.
Manufacturers & Suppliers
Helmut Klumpf Technische Chemie KG
manufacturer
Industriestr. 15, D - 45699 Herten
+49(0)2366 1003 - 0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
After prolonged contact with skin defatting, use barrier cream after prolonged skin contact. Immediately wash with water and soap and rinse thoroughly.
Symptoms: After prolonged contact with skin defatting, use barrier cream after prolonged skin contact.
Rinse opened eye for at least 15 minutes under running water. Get medical attention if irritation occurs.
Rinse mouth with water. If the material has been swallowed and the person is conscious, give small quantities of water to drink. Seek medical attention if symptoms occur. Do not induce vomiting - aspiration!
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam. foam, water haze, water spray-jet.
Water with a full water jet.
Ignitable vapour-air mixtures are heavier than air, spreads along the ground. Inflammation of further removal is possible.
Use water spray to cool fire exposed surfaces and to protect. Cool endangered containers with water spray jet.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Close leaks, if possible without personal risk to take.
Dilute with much water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Material can accumulate static charges which can cause an electrical spark (ignition source). avoid open fire. Keep away from direct sunlight and other heat or ignition. Keep containers tightly sealed. Open and handle container with care. Avoid contact with eyes and skin.
Store under dry conditions. Store in cool location. Use only containers specifically permitted for this substance/product. Keep container tightly sealed. Store in cool, dry conditions in well sealed containers. Store container in a well ventilated position.
Avoid contact with eyes and skin.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Electrical equipment must be suitable for temperature class T2. All equipment must comply VbF. Use explosion-proof auxiliary equipment for class EEx e II use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal conditions.
Can form explosive gas-air mixtures.
Forms explosive gas mixture with air; Reaction with strong reducing agents such as metal hydrides or alkali metals will generate hydrogen gas which could create an explosive hazard; Reacts with peroxides; Reacts with oxidizing agents
Avoid shock, friction, heat, sparks, open flame and other ignition sources. Prevent electrostatic charging.
alkali metals, acetic anhydride, strong oxidizing agents
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Persistence and degradability
Toxicity
Aquatic toxicity:
12.1 Toxicity
12.2 Persistence and degradability
The material is easily biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be made according the local authority regulations.
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1987
- Shipping Name
- Alcohols, n.o.s. (Ethanol/Isopropyl alcohol)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cleaner?
The signal word is danger.
What is the physical form of Cleaner?
Cleaner is a aerosol appearing as clear with clear color. It has alcoholic odor.
What is Cleaner used for?
As Cleaner at the penetration process by colours acc. to EN ISO 3452-1 [EN 571-1] (DIN 54 152 part 1) for finding surface cracks.
What are the hazard statements for Cleaner?
This substance has 1 hazard statement:
- H225: Highly flammable liquid and vapour.