Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1M Tris-HCl pH 8.0
- Product Code
- T1813, T1817
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
General use
Manufacturers & Suppliers
Teknova
manufacturer
2451 Bert Drive, Hollister California 95023, United States
1-800-209-4488
http://www.teknova.com
Emergency Contacts
CHEM TREC Emergency Phone Number
(800)-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.
Wash with plenty of soap and water.
Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.
Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.
Immediate Medical Attention
If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, BC-powder, Carbon dioxide (CO2)
Water jet
In case of fire and/or explosion do not breathe fumes.
Coordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
In case of fire and/or explosion do not breathe fumes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder
Materials: absorbent material (e.g. cloth, fleece), sawdust, kieselgur (diatomite), sand, universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use local and general ventilation. Use only in well-ventilated areas.
Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Type of material: Nitrile
Wear eye/face protection.
In case of inadequate ventilation wear respiratory protection.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".
No known hazardous reactions.
There are no specific conditions known which have to be avoided.
Oxidizers
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The substance is not classified as hazardous to the aquatic environment.
12.5 Results of PBT and vPvB assessment
The substance is not classified as a PBT or vPvB and does not contain such substances at concentrations ≥ 0.1%.
12.6 Endocrine disrupting properties
Does not contain an endocrine disruptor (EDC) in a concentration of ≥ 0.1%.
12.7 Other adverse effects
Data are not available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1M Tris-HCl pH 8.0?
The signal word is no signal word.
What is the physical form of 1M Tris-HCl pH 8.0?
1M Tris-HCl pH 8.0 is a liquid with no data available color. It has no data available odor.
What is the solubility of 1M Tris-HCl pH 8.0?
not determined
What is 1M Tris-HCl pH 8.0 used for?
General use
What is the melting point of 1M Tris-HCl pH 8.0?
The melting point is not determined and the boiling point is 100 °C.