Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TENSAFOAM CL
- Product Code
- 99980000598
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- C110-60TV-R00K-S8RW
Identified Uses
Nettoyant alcalin pour l'industrie alimentaire
Manufacturers & Suppliers
Tensio
manufacturer
Doornpark 36, 9120 Beveren, Belgium
+32 3 755 48 74
Emergency Contacts
Tensio, Beveren
+32 3 755 48 74
Antigifcentrum / Centre Antipoison
+32 70 245 245
Nationaal Vergiftigingen Informatie Centrum
+31 30 274 88 88
Centre Antipoisons
(+32) 070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mélange des substances mentionnées ci-dessous et d'additifs non classés.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydroxyde de potassium EC: 215-181-3 | 1310-58-3 | 5 - 10% | Yes |
| hypochlorite de sodium, solution EC: 231-668-3 | 7681-52-9 | 3 - 5% | Yes |
| Silicate de potassium EC: 215-199-1 | 1312-76-1 | 2.5 - 10% | Yes |
| amines, alkyl de coco diméthyles, N-oxydes EC: 263-016-9 | 61788-90-7 | 2.5 - 3% | Yes |
| hydroxyde de sodium EC: 215-185-5 | 1310-73-2 | 22.5% | Yes |
Notes
Pour le libellé des phrases de risque citées, se référer au chapitre 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness, lay the person down and transport them in a stable side position.
Symptoms: malaise, dizziness
Wash immediately with soap and water and rinse thoroughly.
Symptoms: burns, pain, redness.
Rinse eyes for several minutes under running water, holding eyelids open, and consult a doctor.
Symptoms: lesions, irritations, pain, tearing, redness.
Drink plenty of water and provide fresh air. Consult a doctor immediately.
Symptoms: burns, irritation, pain.
Immediate Medical Attention
Consult a doctor immediately. Treat symptomatically. An eye shower is recommended in the immediate work area.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gants de protection. Le matériau des gants doit être imperméable et résistant au produit / à la substance / à la préparation. Choix du matériau des gants en fonction des temps de pénétration, du taux de perméabilité et de la dégradation. Matériau des gants épaisseur du matériau recommandée: 0,19 mm Caoutchouc nitrile Butylcaoutchouc. Le choix de gants appropriés dépend non seulement du matériau, mais aussi d'autres critères de qualité qui peuvent varier d'un fabricant à l'autre. Puisque le produit représente une préparation composée de plusieurs substances, la résistance des matériaux des gants ne peut pas être calculée à l'avance et doit, alors, être contrôlée avant l'utilisation. Le temps de pénétration exact est à déterminer par le fabricant des gants de protection et à respecter.
Lunettes de protection hermétiques
En cas d'exposition faible ou de courte durée, utiliser un filtre respiratoire; en cas d'exposition intense ou durable, utiliser un appareil respiratoire autonome.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3266
- Shipping Name
- CORROSIVE LIQUID, BASIC, INORGANIC, N.O.S. (POTASSIUM HYDROXIDE, sodium hypochlorite, solution)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TENSAFOAM CL?
The signal word is danger.
What is the physical form of TENSAFOAM CL?
TENSAFOAM CL is a liquide with jaune color. It has caractristique odor.
What is TENSAFOAM CL used for?
Nettoyant alcalin pour l'industrie alimentaire
What are the hazard statements for TENSAFOAM CL?
This substance has 5 hazard statements:
- H314: Provoque de graves brûlures de la peau et de graves lésions des yeux.
- H318: Provoque de graves lésions des yeux.
- H400: Très toxique pour les organismes aquatiques.
- H410: Très toxique pour les organismes aquatiques, entraîne des effets néfastes à long terme.
- H411: Toxique pour les organismes aquatiques, entraîne des effets néfastes à long terme.
What is the melting point of TENSAFOAM CL?
The melting point is Non dtermin. and the boiling point is Non dtermin..