Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GRF COMBI RAPID BD 24ML*12 NLFR
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Kleefstof
Manufacturers & Suppliers
UHU GmbH & Co.KG
manufacturer
Herrmannstraße 7, D-77815 Bühl (Baden)
0049-(0)7223-284-0
Bison International
distributor
Excelsiorlaan 27, B 3, B-1930 Zaventem
+32 3 710 92 92
Emergency Contacts
Antigifcentrum
070 245245
Groothertogdom Luxemburg
8002 - 5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Kleefstof
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bis-[4-(2,3-epoxipropoxi)fenyl]propaan EC: 216-823-5 | 1675-54-3 | 50 - 100% | Yes |
De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Veel verse lucht toedienen en voor alle zekerheid een arts raadplegen. Bij bewusteloosheid ligging en vervoer in stabiele zijligging.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.
Als de klachten niet minderen, een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Aanbevolen materiaaldikte : > 0,12 mm. Material: butyl-rubber (e.g. Butoject 898: material thickness 0,7 mm), Break through time: > 8 h. Material: Ethyl Vinyl Alcohol Laminate (EVAL), Break through time: > 8 h. glove material for short-term use / splash: (10 min <BTT <480 min): nitrile rubber, neoprene rubber Nitrilrubber. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). The suitability for a specific workplace should be discussed with the producers of the protective gloves. Voor het mengsel van de hieronder vermelde chemicalien moet de penetratietijd minstens 10 minuten bedragen (permeatie volgens EN 374 Deel 3: Level 1).
Nauw aansluitende veiligheidsbril. Bij het omgieten is het gebruik van een veiligheidsbril aan te bevelen.
Bescherming van de ademhalingswegen Niet noodzakelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700))
- Transport Class
- 9
- Packing Group
- III
Waarschuwing: Diverse gevaarlijke stoffen en voorwerpen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GRF COMBI RAPID BD 24ML*12 NLFR?
The signal word is warning.
What is the physical form of GRF COMBI RAPID BD 24ML*12 NLFR?
GRF COMBI RAPID BD 24ML*12 NLFR is a vloeibaar with kleurloos color. It has amine-achtig odor.
What is GRF COMBI RAPID BD 24ML*12 NLFR used for?
Kleefstof
What are the hazard statements for GRF COMBI RAPID BD 24ML*12 NLFR?
This substance has 4 hazard statements:
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H411: Giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of GRF COMBI RAPID BD 24ML*12 NLFR?
The melting point is Niet bepaald. and the boiling point is Niet bepaald..