NextSDS Logo
Safety Data Sheet NL

MPM PSF Power Steering Fluid SHVI Synthetic

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MPM PSF Power Steering Fluid SHVI Synthetic
Product Form
Mengsel
Product Code
50000

Regulatory Identifiers

CAS Number
N/A
UFI Code
03XW-W274-6N43-QUQY

Identified Uses

Professioneel gebruik, Consumentengebruik, Industrieel gebruik. Smeermiddelen en additieven

Uses advised against

Geen aanvullende informatie beschikbaar

Manufacturers & Suppliers

MPM International Oil Company BV logo

MPM International Oil Company BV

manufacturer

Cyclotronweg 1, 2629 HN Delft - Nederland

+31 (0)15 2514030

http://www.mpmoil.com

Emergency Contacts

Emergency Contact

+31 (0)15 2514030

08.00 - 17.00 GMT+1

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid

+32 70 245 245

Nationaal Vergiftigingen Informatie Centrum (NVIC)

+31 88 755 80 00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 4 H332
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
H332 Schadelijk bij inademing.
H412 Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P261 Inademing van nevel, damp vermijden.
P301+P310 NA INSLIKKEN: onmiddellijk een ANTIGIFCENTRUM/arts raadplegen.
P304+P340 NA INADEMING: de persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen.
P331 GEEN braken opwekken.
P501 Inhoud/verpakking afvoeren in overeenstemming met lokale en nationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Hoog geraffineerde olie, bevat <3% (w/w) DMSO extract, bepaald volgens IP346.

Chemical Name CAS Number Concentration Hazardous
Dec-1-ene, dimers, hydrogenated EC: 500-228-5 68649-11-6 30 - 60% Yes
Smeerolie (aardolie) Op basis van C15-30 met waterstof behandelde neutrale olie. EC: 276-737-9 72623-86-0 10 - 30% Yes
Koolwaterstoffen, C16-C20, n-alkanen, isoalkanen, cyclische, <2% aromaten EC: 919-029-3 1174522-19-0 1 - 5% Yes
Alkylphenol (2,6-di-tert-butylphenol) EC: 204-884-0 128-39-2 1% Yes
C16-18-(even genummerde, verzadigde en onverzadigde) alkylaminen EC: 627-034-4 1213789-63-9 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

De huid wassen met zachte zeep en water.

Symptoms: Wordt in normale gebruiksomstandigheden niet geacht een ernstig risico voor de huid met zich mee te brengen.

Eye contact

Bij aanraking met de ogen onmiddellijk spoelen met zuiver water gedurende 10-15 minuten.

Symptoms: Wordt in normale gebruiksomstandigheden niet geacht een groot risico op contact met de ogen met zich mee te brengen.

Ingestion

GEEN braken opwekken. Mond met water spoelen. Onmiddellijk een arts raadplegen.

Symptoms: Wordt in normale gebruiksomstandigheden niet geacht een ernstig risico op inslikken met zich mee te brengen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Beschermende handschoenen van Nitrilrubber (NBR) met permeatie van 6 (> 480 minuten), dikte > 0,4 mm, conform EN ISO 374.

Eyes

Veiligheidsbril.

Respiratory

Onder normale gebruiksomstandigheden met een geschikte ventilatie wordt geen speciale ademhalingsbescherming aanbevolen.

Skin/Body

Onder normale gebruiksomstandigheden wordt geen speciale kleding/huidbescherming aanbevolen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Odor
Karakteristiek.
Form
---
Lower Explosive Limit
0.6 vol %
Vapor Pressure
---
Solubility
Niet oplosbaar in water. Organisch oplosmiddel: Oplosbaar
Density
834 kg/m3 @ 15.6℃
Solubility In Fat
Oplosbaar in organisch oplosmiddel.
Bulk Density
---
Upper Explosive Limit
6.5 vol %
Colour
Groen.
Ph
---
Melting Point
- 54 ℃
State Under Standard Conditions
---
Relative Density
---
Voc Content
Bevat geen VOS (vluchtige organische stoffen)
Appearance
Olieachtige vloeistof.
Colour Intensity
---
Flammability
Nagenoeg niet ontvlambare vloeistof, maar kan bij brand gevaarlijk zijn
Kinematic Viscosity
18,6 mm2/s @ 40℃
Flash Point
147 ℃ Pensky-Martens closed cup
Evaporation Rate
---
Vapor Density
---
Molecular Weight
---
Odor Threshold
---
Decomposition Temperature
---
Properties Status
---
Physical State
Vloeibaar.
Physical State Data
liquid
Partition Coefficient
---
Relative Evaporation Rate
---
Crystallisation Point
---
Solidification Point
---
Auto Ignition Temperature
---
Solubility In Water
Niet oplosbaar in water.
Freezing Point
---
Cloud Point
---
Softening Point
---
Dynamic Viscosity
---
Boiling Point
> 320 °℃ @ 101.3 kPa
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Niet gereglementeerd
Shipping Name
Niet gereglementeerd
Transport Class
Niet gereglementeerd
Packing Group
Niet gereglementeerd
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MPM PSF Power Steering Fluid SHVI Synthetic?

The signal word is danger.

What is the physical form of MPM PSF Power Steering Fluid SHVI Synthetic?

MPM PSF Power Steering Fluid SHVI Synthetic is a vloeibaar. appearing as olieachtige vloeistof. with groen. color. It has karakteristiek. odor.

What is the solubility of MPM PSF Power Steering Fluid SHVI Synthetic?

Niet oplosbaar in water. Organisch oplosmiddel: Oplosbaar

What is MPM PSF Power Steering Fluid SHVI Synthetic used for?

Professioneel gebruik, Consumentengebruik, Industrieel gebruik. Smeermiddelen en additieven

What are the hazard statements for MPM PSF Power Steering Fluid SHVI Synthetic?

This substance has 3 hazard statements:

  • H304: Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
  • H332: Schadelijk bij inademing.
  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of MPM PSF Power Steering Fluid SHVI Synthetic?

The melting point is - 54 ℃ and the boiling point is > 320 °℃ @ 101.3 kPa.