NextSDS Logo
Safety Data Sheet NL

MPM Brake Cleaner Pro Aerosol

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MPM Brake Cleaner Pro Aerosol
Product Form
Mengsel
Product Code
A103
Synonyms
A103 | A103-1

Regulatory Identifiers

CAS Number
N/A
UFI Code
S79V-7J3U-270X-GQC0

Identified Uses

Professioneel gebruik, Industrieel gebruik, Onderhoudsproducten voor de automobielindustrie

Uses advised against

Geen aanvullende informatie beschikbaar

Manufacturers & Suppliers

MPM International Oil Company BV logo

MPM International Oil Company BV

distributor

Cyclotronweg 1, 2629 HN Delft - Nederland

+31 (0)15 2514030

http://www.mpmoil.com

Emergency Contacts

MPM International Oil Company BV

+31 (0)15 2514030

08.00 - 17.00 GMT+1

Centre Anti-Poisons/Antigifcentrum c/o Hôpital Militaire Reine Astrid

+32 70 245 245

Nationaal Vergiftigingen Informatie Centrum (NVIC)

+31 88 755 80 00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan open barsten bij verhitting.
H315 Veroorzaakt huidirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H411 Giftig voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P251 Ook na gebruik niet doorboren of verbranden.
P280 Draag Beschermende handschoenen, Beschermende kleding, oogbescherming, gelaatsbescherming.
P403+P233 Op een goed geventileerde plaats bewaren. In goed gesloten verpakking bewaren.
P410+P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 122°F, 50℃.
P501 Inhoud en verpakking afvoeren naar inzamelpunt voor gevaarlijk of bijzonder afval in overeenstemming met lokale, regionale, nationale en/of internationale regelgeving.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Koolwaterstoffen, C6-C7, n-alkanen, isoalkanen, cyclische, <5% n-hexaan; Koolstofdioxide

Chemical Name CAS Number Concentration Hazardous
Koolwaterstoffen, C6-C7, n-alkanen, isoalkanen, cyclische, <5% n-hexaan EC: 921-024-6 --- 90% Yes
Koolstofdioxide EC: 204-696-9 124-38-9 6% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

De getroffen persoon uit de verontreinigde omgeving verwijderen en in de buitenlucht brengen. Bij onwel voelen een antigifcentrum of een arts raadplegen.

Symptoms: Depressie van het centraal zenuwstelsel, hoofdpijn, duizeligheid, slaperigheid, verlies van coördinatievermogen. Kortademigheid.

Skin contact

De besmette kleding uittrekken, de blootgestelde huid wassen met milde zeep en water en vervolgens afspoelen met warm water.

Symptoms: irritatie (jeuk, roodheid, blaarvorming).

Eye contact

BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen. Medische hulp inroepen, indien pijn of roodheid aanhoudt.

Symptoms: Veroorzaakt irritatie van de ogen.

Ingestion

GEEN braken opwekken. Onmiddellijk een arts raadplegen.

Symptoms: Na inslikken: Maag- en darmproblemen. Buikpijn, misselijkheid. Braken.

Medical Treatment

Geen aanvullende informatie beschikbaar.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Draag geschikte handschoenen die bestand zijn tegen chemische penetratie. Handschoenen van Nitrilrubber (NBR), permeatie 6 (> 480 minuten), dikte > 0,35 mm, conform EN ISO 374.

Eyes

Nauwaansluitende bril. Veiligheidsbril voor druppeltjes, helder, conform EN 166.

Respiratory

Bij ontoereikende ventilatie een geschikte adembescherming dragen. Stofmasker bij kans op spatten.

Skin/Body

Draag geschikte beschermende kleding, handschoenen en een beschermingsmiddel voor de ogen/het gezicht.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
12 ℃
Odor
Karakteristiek.
Ph
Niet beschikbaar
Explosive Limits
---
Molecular Weight
---
Solubility
Niet oplosbaar in water.
Form
---
Properties Status
---
Partition Coefficient
Niet beschikbaar
Flammability
Technische onmogelijkheid om de gegevens te verkrijgen
Voc Content
671,16 g/l
Boiling Point
- 57 (-57 - 110) ℃
Crystallisation Point
---
Colour Intensity
---
Cloud Point
---
Solidification Point
---
Evaporation Rate
---
Vapor Pressure
900 Pa @ 20℃
Freezing Point
Niet beschikbaar
Physical State
Vloeibaar.
Upper Explosive Limit
7 vol %
Kinematic Viscosity
1 mm2/s @ 40℃
Melting Point
Niet beschikbaar
Relative Density
714 kg/m3 @ 20℃
Solubility In Water
Niet oplosbaar in water.
Colour
Kleurloos.
Metal Corrosion
---
Softening Point
---
Decomposition Temperature
Niet beschikbaar
Density
Niet beschikbaar
Odor Threshold
Technische onmogelijkheid
Auto Ignition Temperature
367 ℃
Relative Evaporation Rate
4,2
State Under Standard Conditions
---
Lower Explosive Limit
1 vol %
Dynamic Viscosity
1 mPa.s @ 20℃
Appearance
Spuitbus.
Physical State Data
liquid
Vapor Density
---
Solubility In Fat
---
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1950
Shipping Name
SPUITBUSSEN (AEROSOLEN)
Transport Class
2.1
ADR

Brand- of ontploffingsgevaar bij verwarming, Waarschuw de autoriteiten, als het product in de riolering of open water terechtkomt

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is MPM Brake Cleaner Pro Aerosol known by?

MPM Brake Cleaner Pro Aerosol is also known as: A103 | A103-1

What is the hazard signal word for MPM Brake Cleaner Pro Aerosol?

The signal word is danger.

What is the physical form of MPM Brake Cleaner Pro Aerosol?

MPM Brake Cleaner Pro Aerosol is a vloeibaar. appearing as spuitbus. with kleurloos. color. It has karakteristiek. odor.

What is the solubility of MPM Brake Cleaner Pro Aerosol?

Niet oplosbaar in water.

What is MPM Brake Cleaner Pro Aerosol used for?

Professioneel gebruik, Industrieel gebruik, Onderhoudsproducten voor de automobielindustrie

What are the hazard statements for MPM Brake Cleaner Pro Aerosol?

This substance has 5 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan open barsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H411: Giftig voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of MPM Brake Cleaner Pro Aerosol?

The melting point is Niet beschikbaar and the boiling point is - 57 (-57 - 110) ℃.