Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BIS SG GEL BS 3G*12 NLFR
- Product Form
- Kleefstof
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Geen verdere relevante informatie verkrijgbaar.
Manufacturers & Suppliers
UHU GmbH & Co.KG
manufacturer
Herrmannstraße 7, D-77815 Bühl (Baden)
0049-(0)7223-284-0
Bison International
distributor
Excelsiorlaan 27, B 3, B-1930 Zaventem
+32 3 710 92 92
Emergency Contacts
Antigifcentrum
070 245245
Groothertogdom Luxemburg
8002 - 5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Kleefstof
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-cyanoacrylate d'éthyle EC: 230-391-5 | 7085-85-0 | 50 - 100% | Yes |
De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij bewusteloosheid ligging en vervoer in stabiele zijligging.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.
Als de klachten niet minderen, een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
BIS SG CONTROL BS 3G A2*12 NLFR
---
BIS MK TRANS TP 250G*6 NLFR
---
BIS HARD PVC ADH GEL BO 250ML*6 NLFR
---
BIS CONSTRUCT ADH BO 75G*12 NLFR
CAS: 9016-87-9
BIS MR POWER BD 20G*6 NLFR
---
BIS HARD PVC ADH GEL (D) BO 250ML*6 NLFR
---
BIS SG CONTROL LIQUID BS 3G UHU sekundenkleber blitzschnell *12 NL
---
BIS LOCK BOND BD 10ML*6 NLFR
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Aanbevolen materiaaldikte : > 0,12 mm. Nitrile gloves with a material thickness of > 0.1 mm (penetration time < 30s). Protective nitrile rubber gloves according to EN 374 are recommended for prolonged contact. Material thickness > 0.4 mm. Breakthrough time > 30 minutes. Nitrilrubber. Doordringingstijd van het handschoenmateriaal: Voor het mengsel van de hieronder vermelde chemicalien moet de penetratietijd minstens 10 minuten bedragen (permeatie volgens EN 374 Deel 3: Level 1).
Veiligheidsbril. Nauw aansluitende veiligheidsbril. Bij het omgieten is het gebruik van een veiligheidsbril aan te bevelen.
Niet noodzakelijk.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BIS SG GEL BS 3G*12 NLFR?
The signal word is warning.
What is the physical form of BIS SG GEL BS 3G*12 NLFR?
BIS SG GEL BS 3G*12 NLFR is a vloeibaar with kleurloos color. It has karakteristiek odor.
What is the solubility of BIS SG GEL BS 3G*12 NLFR?
Niet resp. gering mengbaar.
What is BIS SG GEL BS 3G*12 NLFR used for?
Geen verdere relevante informatie verkrijgbaar.
What are the hazard statements for BIS SG GEL BS 3G*12 NLFR?
This substance has 3 hazard statements:
- H315: Veroorzaakt huidirritatie.
- H319: Veroorzaakt ernstige oogirritatie.
- H335: Kan irritatie van de luchtwegen veroorzaken.
What is the melting point of BIS SG GEL BS 3G*12 NLFR?
The melting point is Niet bepaald. and the boiling point is 60 ℃.