Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MAPETHENE PRIMER W
- Product Code
- 9073449
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Waterdispersie van synthetische polymeren
Uses advised against
Gegevens niet beschikbaar
Manufacturers & Suppliers
MAPEI BENELUX SA/NV
supplier
Zoning Industriel - Rue de l'Avenir, 40 - B-4460 Grace-Hollogne
+32-4-2397070
http://www.mapei.be
Emergency Contacts
Emergency Contact
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
MAPETHENE PRIMER W
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-benzisothiazool-3(2H)-on EC: 220-120-9 | 2634-33-5 | 0.025% | Yes |
| 5-chloor-2-methyl-2H-isothiazool-3-on en 2-methyl-2H-isothiazool-3-on EC: 611-341-5 | 55965-84-9 | 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Breng de gewonde naar buiten in de open lucht en houd hem/haar warm en in rust.
Met veel water en zeep wassen.
Onmiddellijk wassen met water.
Geen braken opwekken, maar medische hulp zoeken en de SDS en gevaarlabel laten zien.
Medical Treatment
Niet beschikbaar
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geschikte materialen voor veiligheidshandschoenen; EN ISO 374: Polychloropreen - CR: dikte>= 0,5 mm; doorbraaktijd>= 480min. Nitrilrubber - NBR: dikte>= 0,35mm; doorbraaktijd>= 480min. Butylrubber - IIR: dikte>= 0,5 mm; doorbraaktijd>= 480min. Fluorrubber - FKM: dikte>= 0,4 mm; doorbraaktijd>= 480min.
Niet vereist voor normaal gebruik. Ga hoe dan ook te werk volgens de juiste arbeidsgewoonten.
Niet vereist voor normaal gebruik. Ga hoe dan ook te werk volgens de juiste arbeidsgewoonten.
Er is geen enkele speciale voorzorgsmaatregeleneist voor normaal gebruik.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MAPETHENE PRIMER W?
The signal word is no signal word.
What is the physical form of MAPETHENE PRIMER W?
MAPETHENE PRIMER W is a vloeistof appearing as vloeibaar with wit color. It has karakteristiek odor.
What is MAPETHENE PRIMER W used for?
Waterdispersie van synthetische polymeren
What is the melting point of MAPETHENE PRIMER W?
The melting point is Niet beschikbaar and the boiling point is Niet beschikbaar.