NextSDS Logo
Safety Data Sheet NL

GRF SILICONE SPRAY AE 300ML*6 L221

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GRF SILICONE SPRAY AE 300ML*6 L221
Product Code
L221

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Smeermiddel

Manufacturers & Suppliers

B

Bison International

manufacturer

Dr.A.F.Philipsstraat 9, NL-4462 EW Goes, PO Box 160, NL-4460 AD Goes

+31 88 3235700

Emergency Contacts

Nationale Vergiftigingen Informatie Centrum

088 755 8000

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
H229 Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
H304 Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
H315 Veroorzaakt huidirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H412 Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P261 Inademing van spuitnevel vermijden.
P273 Voorkom lozing in het milieu.
P410+P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 ℃/122 °F.
P501 De inhoud/verpakking afvoeren overeenkomstig de nationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mengsel

Smeermiddel

Chemical Name CAS Number Concentration Hazardous
propaan EC: 200-827-9 74-98-6 10 - 25% Yes
butaan, zuiver EC: 203-448-7 106-97-8 10 - 25% Yes
Koolwaterstoffen, C6, isoalkanen, <5% n-hexaan EC: 931-254-9 64742-49-0 10 - 25% Yes
isobutaan EC: 200-857-2 75-28-5 10 - 25% Yes
Koolwaterstoffen, C9-C11, n-alkanen, isoalkanen, cyclische verbindingen, <2% aromaten EC: 919-857-5 64742-48-9 10 - 25% Yes

De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij bewusteloosheid ligging en vervoer in stabiele zijligging.

Skin contact

Onmiddellijk met water en zeep afwassen en goed naspoelen.

Eye contact

Ogen bij geopend ooglid meerdere minuten met stromend water spoelen.

Ingestion

Als de klachten niet minderen, een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Geen aanvullende gegevens. Zie 7.

Hands

Veiligheidshandschoenen. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Aanbevolen materiaaldikte : > 0,12 mm Nitrilrubber. Voor het mengsel van de hieronder vermelde chemicaliën moet de penetratietijd minstens 10 minuten bedragen (permeatie volgens EN 374 Deel 3: Level 1).

Eyes

Niet noodzakelijk.

Respiratory

Niet noodzakelijk.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Lower Explosive Limit
0,6 Vol %
Molecular Weight
---
Bulk Density
---
Odor
Oplosmiddelachtig
Vapor Density
Niet bepaald.
Colour Intensity
---
Solidification Point
---
Metal Corrosion
---
Vapor Pressure
8300 hPa (74-98-6 propaan)
Kinematic Viscosity
Niet bepaald.
Explosive Limits
---
Physical State Data
aerosol
Solubility In Water
Niet resp. gering mengbaar.
Density
~0,6 g/cm3
Auto Ignition Temperature
240 ℃
Voc Content
---
Solubility
---
Softening Point
---
Partition Coefficient
Niet bepaald.
Crystallisation Point
---
Colour
Kleurloos
Upper Explosive Limit
10,9 Vol % (74-98-6 propaan)
Melting Point
Niet bepaald.
Flammability
Niet bruikbaar.
Relative Evaporation Rate
---
Relative Density
Niet bepaald.
Odor Threshold
Niet bepaald.
Boiling Point
-44,5 °℃ (74-98-6 propaan)
Properties Status
---
Ph
Het mengsel is een gas.
Evaporation Rate
---
Flash Point
-60 °℃ (106-97-8 butaan, zuiver)
Form
---
Appearance
---
Dynamic Viscosity
Niet bepaald.
State Under Standard Conditions
---
Decomposition Temperature
Niet bepaald.
Physical State
Aerosol
Freezing Point
Niet bepaald.
Cloud Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
AEROSOLS, flammable
Transport Class
2.1 Gassen
Packing Group
Niet van toepassing
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GRF SILICONE SPRAY AE 300ML*6 L221?

The signal word is danger.

What is the physical form of GRF SILICONE SPRAY AE 300ML*6 L221?

GRF SILICONE SPRAY AE 300ML*6 L221 is a aerosol with kleurloos color. It has oplosmiddelachtig odor.

What is GRF SILICONE SPRAY AE 300ML*6 L221 used for?

Smeermiddel

What are the hazard statements for GRF SILICONE SPRAY AE 300ML*6 L221?

This substance has 6 hazard statements:

  • H222: Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
  • H229: Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
  • H304: Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of GRF SILICONE SPRAY AE 300ML*6 L221?

The melting point is Niet bepaald. and the boiling point is -44,5 °℃ (74-98-6 propaan).