NextSDS Logo
Safety Data Sheet NL

PL35 omnicem

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PL35 omnicem
Product Form
Poeder

Regulatory Identifiers

CAS Number
N/A
REACH No.
niet relevant (mengsel)
UFI Code
K29K-CWP5-500A-N593

Identified Uses

Poedertegellijm, Professioneel gebruik, Consumenten gebruik

Manufacturers & Suppliers

O

Omnicol NV

manufacturer

Nijverheidsstraat 14, 2381 Weelde, België

+32 14 65 62 85

Emergency Contacts

Antigifcentrum / Centre Antipoisons / Gift-Notruf

070 245 245

24/7 bereikbaar / accessible / erreichbaar

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H315 Veroorzaakt huidirritatie.
H317 Kan een allergische huidreactie veroorzaken.
H318 Veroorzaakt ernstig oogletsel.
H335 Kan irritatie van de luchtwegen veroorzaken.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P261 Inademing van stof vermijden.
P280 Beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming dragen.
P302+P352 BIJ CONTACT MET DE HUID: met veel water en zeep wassen.
P304+P340 NA INADEMING: de persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen.
P305+P351+P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
P501 Inhoud/verpakking afvoeren overeenkomstig de plaatselijke/regionale/nationale/internationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Het product bevat geen (additionele) inhoudsstoffen die zijn ingedeeld volgens de huidige kennis van de leverancier en bijdragen aan de indeling van het product.

Chemical Name CAS Number Concentration Hazardous
Portland cement EC: 266-043-4 65997-15-1 25 - 50% Yes
Ovenstof, portland cement EC: 270-659-9 68475-76-3 2.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Voor verse lucht zorgen. Bij onregelmatige ademhaling of ademstilstand direct een arts raadplegen en eerste hulp toedienen. In geval van irritatie aan de luchtwegen, een arts raadplegen.

Skin contact

Losse deeltjes van de huid afvegen. Huid met water afspoelen/afdouchen. Met veel water en zeep wassen. Een ANTIGIFCENTRUM/arts raadplegen.

Eye contact

Wrijf niet in de ogen. Minstens 15 minuten met schoon, vloeiend water spoelen terwijl de oogleden worden opengehouden. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen. Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen.

Ingestion

Mond met water spoelen (alleen als de persoon bij bewustzijn is). GEEN braken opwekken. Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen.

Immediate Medical Attention

Bij twijfel, aanhoudende symptomen, onregelmatige ademhaling, ademstilstand of onwel voelen, direct een arts of ANTIGIFCENTRUM raadplegen. Voor specialistisch advies dient de arts contact op te nemen met het antigifcentrum.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Algemene ventilatie. Voorzie oogdouches en nooddouches op de werkplek.

Hands

Draag geschikte handschoenen. Geschikt zijn volgens EN 374 beproefde handschoenen tegen chemicaliën. Soort materiaal: IIR (isobuteen-isopreen (butyl) rubber), Nitril rubber, Butyl rubber. Gebruik handschoenen met een minimum materiaaldikte: ≥ 0,38 mm. Gebruik handschoenen met een minimum doorbraaktijd van het handschoenmateriaal: >480 minuten (permeatieniveau: 6).

Eyes

Veiligheidsbril met zijbescherming dragen (EN 166).

Respiratory

Bij ontoereikende ventilatie een geschikte adembescherming dragen. Vol-/half-/kwartmasker (EN 136/140). Type: ABEK-P2 (combinatiefilter voor gassen, dampen en partikels, kleurcode: bruin/grijs/geel/groen/wit).

Skin/Body

Beschermende kleding (EN 340 & EN ISO 13688).

Environmental

Neem passende maatregelen om ongecontroleerde verspreiding in het milieu te voorkomen. Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
---
Metal Corrosion
---
Form
poeder
Melting Point
niet bepaald
Explosive Limits
---
Crystallisation Point
---
Decomposition Temperature
geen gegevens beschikbaar
Relative Density
---
Lower Explosive Limit
LEL:
Flammability
niet brandbaar
Relative Evaporation Rate
---
Auto Ignition Temperature
niet relevant
Vapor Pressure
niet bepaald
Cloud Point
---
Solubility
niet bepaald
Partition Coefficient
deze informatie is niet beschikbaar
Properties Status
---
Upper Explosive Limit
niet relevant
Physical State
vast (poeder)
Molecular Weight
---
Voc Content
---
Softening Point
---
Boiling Point
niet bepaald
Solidification Point
---
Physical State Data
solid
Freezing Point
niet bepaald
Evaporation Rate
---
Colour
grijs - wit
Vapor Density
---
Density
niet bepaald
Appearance
---
Odor
geurloos
Bulk Density
---
State Under Standard Conditions
---
Solubility In Fat
---
Solubility In Water
---
Colour Intensity
---
Odor Threshold
---
Ph
12 - 13 (base)
Kinematic Viscosity
niet relevant
Flash Point
niet van toepassing
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Transport Class
geen
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PL35 omnicem?

The signal word is danger.

What is the physical form of PL35 omnicem?

PL35 omnicem is a vast (poeder) with grijs - wit color. It has geurloos odor.

What is the solubility of PL35 omnicem?

niet bepaald

What is PL35 omnicem used for?

Poedertegellijm, Professioneel gebruik, Consumenten gebruik

What are the hazard statements for PL35 omnicem?

This substance has 4 hazard statements:

  • H315: Veroorzaakt huidirritatie.
  • H317: Kan een allergische huidreactie veroorzaken.
  • H318: Veroorzaakt ernstig oogletsel.
  • H335: Kan irritatie van de luchtwegen veroorzaken.

What is the melting point of PL35 omnicem?

The melting point is niet bepaald and the boiling point is niet bepaald.