NextSDS Logo
Safety Data Sheet NL

WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST
Product Code
WB03

Regulatory Identifiers

CAS Number
N/A

Identified Uses

gebaseerd op gebruiksbeschrijvingsysteem afgegeven als richtlijn van het Europees Agentschap voor Chemische stoffen. Gebruikssector: SU 3, SU 22. Productcategorie: PC9a, PC9b. Verdere informatie zie hoofdstuk Blootstellingsscenario

Uses advised against

Het product is alleen bestemd voor industrieel en/of professioneel gebruik, niet voor enig huishoudelijk gebruik.

Manufacturers & Suppliers

Axalta Coating Systems Belgium BVBA logo

Axalta Coating Systems Belgium BVBA

importer

Antoon Spinoystraat 6b, 2800 Mechelen

+32 15 47 8500

http://www.cromax.com/

R

Regulatory Affairs

manufacturer

+49 (0)202 529-2385

Emergency Contacts

fabrikant

+(32)-28083237

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel uit synthetische kunstharsen, pigmenten en oplosmiddelen. Plus water

Chemical Name CAS Number Concentration Hazardous
dipropyleenglycolmethylether EC: 252-104-2 34590-94-8 5 - 7% Yes
2-propanol EC: 200-661-7 67-63-0 1 - 2% Yes
2,4,7,9-tetramethyldec-5-yn-4,7-diol EC: 204-809-1 126-86-3 0.25 - 0.5% Yes

Om foutieve interpretaties bij de risico beoordeling te vermijden, mogen de opgegeven percentages niet worden opgeteld.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Voorkom inademing van damp of nevel. In de frisse lucht brengen na onopzettelijk inademen van dampen. Bij onregelmatige ademhaling of ademstilstand kunstmatige beademing toepassen. Bij bewusteloosheid de patiënt in stabiele zijligging leggen en medische hulp inroepen. Indien symptomen aanhouden, een arts raadplegen.

Skin contact

Geen oplosmiddelen of verdunners gebruiken! Verontreinigde kleding onmiddellijk uittrekken.

Eye contact

Contactlenzen uitnemen. Oogleden openhouden en minstens 15 minuten met veel water spoelen. Medische hulp inroepen.

Ingestion

In geval van inslikken onmiddellijk een arts raadplegen en verpakking of etiket tonen. GEEN braken opwekken. Rustig houden.

Immediate Medical Attention

Bij bewusteloosheid de patiënt in stabiele zijligging leggen en medische hulp inroepen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Zorg voor voldoende luchtverversing. Dit kan bereikt worden door goede algemene afzuiging of, waar praktisch uitvoerbaar, plaatselijke afzuigventilatie. Als deze maatregelen niet voldoende blijken om de stofconcentratie en oplosmiddelconcentratie beneden de MAC waarde te houden moet geschikte adembescherming worden gedragen. Masker met gasfilter, type A (EN 141)

Hands

De doordringingtijd van de handschoenen voor de stof zelf is onbekend Het omschreven materiaal voor de handsschoenen wordt aanbevolen op basis van de bestanddelen van het preparaat. Handschoenmateriaal: Nitrilrubber, Handschoendikte: 0.33 mm, Penetratietijd: 60 min. Voor bescherming bij spuiten moet een beschermende nitrilhandschoen van de chemicaliënbestendigheidsgroep 3 (bijvoorbeeld een Dermatril®-handschoen) worden gebruikt. Na verontreiniging moet de handschoen worden verwisseld. Bij onderdompeling in het product moet een butyl- of fluorrubber handschoen worden gedragen. Handschoenen moeten bij beschadiging of de eerste tekenen van slijtage meteen worden vervangen.

Eyes

Ter bescherming van spatten van het oplosmiddel veiligheidsbril dragen.

Respiratory

Indien personeel wordt blootgesteld aan een niveau boven het maximum, dan moeten zij gebruik maken van de juiste, goedgekeurde ademhalingsbescherming. Masker met gasfilter, type A (EN 141).

Skin/Body

Draag geschikte beschermende kleding. Antistatische kleding uit natuurlijke vezels (katoen) of synthetische vezels dragen die bestand is tegen hitte.

Environmental

Product niet in de riolering laten komen. Zie hoofdstuk 12 voor ecologische informatie.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
geen gegevens beschikbaar
Metal Corrosion
---
Auto Ignition Temperature
270 ℃
Solubility
---
Form
vloeibaar
Freezing Point
---
Lower Explosive Limit
1,1 vol-% gebaseerd op het gehalte organisch oplosmiddel
Evaporation Rate
Trager dan ether
Melting Point
vervalt
Ph
geen gegevens beschikbaar
Explosive Limits
---
Colour
wit
Flammability
niet relevant, aangezien het product vloeibaar is
Odor
Er is geen geur waarneembaar.
Softening Point
---
Upper Explosive Limit
14 vol-% gebaseerd op het gehalte organisch oplosmiddel
Crystallisation Point
---
Appearance
wit
Kinematic Viscosity
<20 s
Dynamic Viscosity
---
Colour Intensity
---
Vapor Pressure
1,0 hPa
Relative Evaporation Rate
---
Solubility In Fat
geen gegevens beschikbaar
Relative Density
1,15 g/cm3
Solidification Point
---
Partition Coefficient
Dit product is een mengsel. zie sectie 12 voor details
Voc Content
75,3 %
Odor Threshold
---
Decomposition Temperature
Dit product is een mengsel. Zie sectie 10 voor verdere informatie.
Physical State
vloeibaar
Cloud Point
---
Bulk Density
---
Boiling Point
100 ℃
Density
---
Molecular Weight
---
Solubility In Water
aanmerkelijk
Properties Status
---
Physical State Data
liquid
State Under Standard Conditions
---
Flash Point
80 ℃
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST?

The signal word is no signal word.

What is the physical form of WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST?

WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST is a vloeibaar appearing as wit with wit color. It has er is geen geur waarneembaar. odor.

What is WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST used for?

gebaseerd op gebruiksbeschrijvingsysteem afgegeven als richtlijn van het Europees Agentschap voor Chemische stoffen. Gebruikssector: SU 3, SU 22. Productcategorie: PC9a, PC9b. Verdere informatie zie hoofdstuk Blootstellingsscenario

What is the melting point of WB03 CROMAX(R) PRO MIXING COLOR CRYSTALLINE FROST?

The melting point is vervalt and the boiling point is 100 ℃.