Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ONTSTOPPER FLASH MILD
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- DFKY-E81S-D007-KRE7
Identified Uses
ontstopper
Manufacturers & Suppliers
BIELEN PRODUKTEN NV
manufacturer
Walenstraat 65, 3500 Hasselt
+32011819141
http://www.bielenprodukten.be/
Emergency Contacts
Emergency Contact
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Natriumhydroxide EC: 215-185-5 | 1310-73-2 | 30% | Yes |
Voor de volledige tekst van de H-zinnen die worden genoemd in deze rubriek, zie rubriek 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Rechtop laten zitten, frisse lucht, rust en naar ziekenhuis vervoeren.
Symptoms: hoofdpijn, duizeligheid, misselijkheid, sufheid, bewusteloosheid
Verontreinigde kleding uittrekken, huid spoelen met veel water en onmiddellijk naar ziekenhuis vervoeren.
Symptoms: bijtend, roodheid, pijn, ernstige brandwonden
Eerst langdurig spoelen met water (contactlenzen verwijderen mits makkelijk mogelijk), dan naar arts brengen.
Symptoms: bijtend, roodheid, slecht zien, pijn
Mond laten spoelen, GEEN braken opwekken en onmiddellijk naar ziekenhuis vervoeren.
Symptoms: bijtend, ademnood, braken, blaren op lippen en tong, brandende pijn in mond en keel, slokdarm en maag
Immediate Medical Attention
Seek medical advice as soon as possible in case of severe or persistent disorders. Transport to hospital immediately for skin contact, ingestion, and inhalation. Bring to a doctor for eye contact.
Medical Treatment
None specified.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Het beschermingsniveau en soorten van maatregelen zijn afhankelijk van de omstandigheden op de werkplek. Er moet voor adequate ventilatie gezorgd worden zodat de blootstellingslimieten niet overschreden worden. Voor meer informatie, zie rubriek 7.
Met nitril-handschoenen (EN 374) hanteren. Minimale doorbraaktijd van > 480 minuten, dikte 0,35mm. Handschoenen voor gebruik goed controleren. Handschoenen netjes uittrekken zonder de buitenkant aan te raken met de blote hand. De geschiktheid voor een specifieke werkplek moet worden overlegd met de fabrikant van de beschermhandschoenen.
Gebruik een nauw aansluitende veiligheidsbril (EN 166). Een volgelaatsscherm en beschermend pak dragen bij uitzonderlijke verwerkingsproblemen.
Gebruiken met voldoende afzuigventilatie. Indien nodig, gebruik een luchtzuiverend gezichtsmasker in geval van ademhalingsrisico's. Als bescherming tegen deze belastende niveaus, gebruik type ABEK.
Gebruik niet doorlaatbare beschermende kleding die bestand is tegen dit product. De keuze van specifieke onderdelen zoals gelaatsmasker, handschoenen, laarzen, schort of volledig pak hangt af van de werkzaamheden.
Voldoe aan de relevante milieureglementeringen die het lozen in lucht, water en grond beperken. Bescherm het milieu door juiste controlemaatregelen toe te passen om uitstoot te voorkomen of te beperken. Voor meer informatie, zie rubrieken 6 en 13.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1824
- Shipping Name
- UN 1824 Natriumhydroxide oplossing, 8, II, (E)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ONTSTOPPER FLASH MILD?
The signal word is danger.
What is the physical form of ONTSTOPPER FLASH MILD?
ONTSTOPPER FLASH MILD is a vloeibaar with kleurloos color. It has kenmerkend odor.
What is ONTSTOPPER FLASH MILD used for?
ontstopper
What are the hazard statements for ONTSTOPPER FLASH MILD?
This substance has 3 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H318: Veroorzaakt ernstige brandwonden en oogletsel.
What is the melting point of ONTSTOPPER FLASH MILD?
The melting point is 0 ℃ and the boiling point is 100 °C - 100 ℃.