Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PU-SYSTEM FLEXOVOSS K6S (A-Komponente)
- Product Code
- 126.447
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings
Manufacturers & Suppliers
Vosschemie GmbH
manufacturer
Esinger Steinweg 50, 25436 Uetersen, Duitsland
04122 717 0
VOSSCHEMIE
Emergency Contacts
Giftinformationszentrum (GIZ)-Nord, Göttingen, Deutschland
0551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mengsel
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-phenoxypropan-2-ol EC: 212-222-7 | 770-35-4 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Het slachtoffer overbrengen in de frisse lucht. Als de verschijnselen aanhouden medische hulp inroepen.
Onmiddellijk afwassen met zeep en veel water en alle verontreinigde kleding en schoenen uittrekken. Indien symptomen aanhouden, een arts raadplegen.
Oogleden open houden en de ogen spoelen met veel water gedurende tenminste 15 minuten. Medische hulp inroepen.
GEEN braken opwekken. Onmiddellijk een arts waarschuwen.
Immediate Medical Attention
Medische hulp inroepen indien symptomen aanhouden (inademing, huidcontact) of voor oogcontact. Onmiddellijk een arts waarschuwen bij inslikken.
Medical Treatment
Symptomatisch behandelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
PU-SYSTEM FLEXOVOSS K6S (A-Komponente)
---
PU-SYSTEM FLEXOVOSS K6 S-T-H (B-Komponente)
UFI: 6XD3-W0EC-T00M-AFGE
PU-SYSTEM FLEXOVOSS K6 S-T-H (B-Komponente)
---
PU-SYSTEM G8-Super
---
PU-SYSTEM G8-Super
UFI: GPD3-D0C5-W004-CER7
LUBA-print® 897/K-PM
UFI: 79K0-Y0SN-E00A-QJXW
K-FLEX K-FONIK P
---
DRY FLEX® 1 - Component A
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
This can be achieved by good general extraction or, where practically feasible, local exhaust ventilation.
Material: Nitrile rubber, Breakthrough time: >= 480 min, Glove thickness: >= 0.4 mm, Standard: DIN EN 374, Protection index: Class 6. Gloves must be discarded and replaced upon signs of degradation or chemical breakthrough. Data on permeation time/material strength are standard values! The actual permeation time/material strength must be requested from the manufacturer of the protective gloves. The choice of a suitable glove depends not only on the material but also on other quality aspects and varies from manufacturer to manufacturer. Preventive skin protection.
Safety glasses with side shields according to EN 166.
No personal respiratory protection required under normal use.
Wear suitable protective clothing, e.g., made of cotton or heat-resistant synthetic fibers. Long-sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Niet gereguleerd als gevaarlijke stof
- Shipping Name
- Niet gereguleerd als gevaarlijke stof
- Transport Class
- Niet gereguleerd als gevaarlijke stof
- Packing Group
- Niet gereguleerd als gevaarlijke stof
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PU-SYSTEM FLEXOVOSS K6S (A-Komponente)?
The signal word is no signal word.
What is the physical form of PU-SYSTEM FLEXOVOSS K6S (A-Komponente)?
PU-SYSTEM FLEXOVOSS K6S (A-Komponente) is a visceuze vloeistof appearing as visceuze vloeistof with grijs color. It has licht, kenmerkend odor.
What is PU-SYSTEM FLEXOVOSS K6S (A-Komponente) used for?
Coatings
What is the melting point of PU-SYSTEM FLEXOVOSS K6S (A-Komponente)?
The melting point is Niet uitgevoerd and the boiling point is Niet uitgevoerd.