NextSDS Logo
Safety Data Sheet NL

Interflon Fin Grease (aerosol)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Interflon Fin Grease (aerosol)
Product Form
aerosol

Regulatory Identifiers

CAS Number
N/A
REACH No.
niet relevant (mengsel)
UFI Code
CH00-M0KA-K000-N79J

Identified Uses

smeermiddel

Manufacturers & Suppliers

Interflon BV logo

Interflon BV

manufacturer

Belder 47, 4704 RK Roosendaal, Nederland

+31 (0)165 553911

http://www.interflon.com

Emergency Contacts

Centre Antipoisons

+32 (0)70 245 245

ma - vr 00:00 - 23:00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan open barsten bij verhitting.
H315 Veroorzaakt huidirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H412 Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P261 Inademing van stof/rook/gas/nevel/damp/spuitnevel vermijden.
P273 Voorkom lozing in het milieu.
P280 Beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming dragen.
P312 Bij onwel voelen een ANTIGIFCENTRUM/arts raadplegen.
P403+P233 Op een goed geventileerde plaats bewaren. In goed gesloten verpakking bewaren.
P410+P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 C/122 F.
P501 Inhoud/verpakking afvoeren naar industrile verbrandingsinstallatie.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel van plantaardige en synthetische olin, additieven en MicPol.

Chemical Name CAS Number Concentration Hazardous
propaan EC: 200-827-9 74-98-6 10 - 25% Yes
butaan EC: 203-448-7 106-97-8 10 - 25% Yes
isobutaan EC: 200-857-2 75-28-5 10 - 25% Yes
Hydrocarbons, C7-C9, isoalkanes EC: 921-728-3 64741-66-8 10 - 25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij onregelmatige ademhaling of ademstilstand direct een arts raadplegen en eerste hulp toedienen. In geval van irritatie aan de luchtwegen, een arts raadplegen. Voor verse lucht zorgen.

Symptoms: Irritatie aan de luchtwegen.

Skin contact

Met veel water en zeep wassen.

Eye contact

Contactlenzen verwijderen, indien mogelijk. Blijven spoelen. Minstens 10 minuten met schoon, vloeiend water spoelen terwijl de oogleden worden opengehouden.

Ingestion

Mond met water spoelen (alleen als de persoon bij bewustzijn is). GEEN braken opwekken.

Immediate Medical Attention

Bij onregelmatige ademhaling of ademstilstand direct een arts raadplegen en eerste hulp toedienen. Bij twijfel of bij aanhoudende symptomen een arts raadplegen. In geval van irritatie aan de luchtwegen, een arts raadplegen.

Medical Treatment

geen

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Uitsluitend op goed geventileerde plaatsen gebruiken. Bij ontoereikende ventilatie een geschikte adembescherming dragen.

Hands

Draag geschikte handschoenen. Soort materiaal. NBR: acrylonitriel-butadieenrubber. CR: chloropreen (chlorobutadieen)- rubber. PVC: polyvinylchloride.

Eyes

Een bescherming voor de ogen/voor het gezicht dragen. Veiligheidsbril met zijbescherming dragen.

Respiratory

Niet vereist, tenzij bij ontoereikende ventilatie, dan een geschikte adembescherming dragen.

Skin/Body

Rustperioden voor regeneratie van de huid inlassen. Preventieve huidbescherming (huidbeschermende crèmes) wordt aanbevolen. Na gebruik handen grondig wassen.

Environmental

Neem passende maatregelen om verspreiding in het milieu te voorkomen. Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
arosol (sprayaerosol)
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
wit
Colour Intensity
---
Form
---
Odor
Mild
Odor Threshold
---
Ph
niet bepaald
Melting Point
niet bepaald
Boiling Point
<0 C
Flash Point
<-60 C
Freezing Point
niet bepaald
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
niet bepaald
Vapor Pressure
3.800 hPa bij 20 C
Vapor Density
deze informatie is niet beschikbaar
Relative Density
---
Bulk Density
---
Density
0,67 [g] / cm bij 20 C
Flammability
ontvlambaar aerosol overeenkomstig GHS-criteria
Upper Explosive Limit
10 vol%
Lower Explosive Limit
1,5 vol%
Explosive Limits
---
Auto Ignition Temperature
>360 C (zelfontbrandingstemperatuur (vloeistoffen en gassen))
Decomposition Temperature
---
Solubility
niet bepaald
Partition Coefficient
deze informatie is niet beschikbaar
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
niet relevant (arosol)
Kinematic Viscosity
niet relevant (arosol)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
SPUITBUSSEN
Transport Class
Klasse 2 (gassen) (arosol), Bijkomend gevaar 2.1 (ontvlambaar)
Packing Group
geen verpakkingsgroep toegewezen
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Interflon Fin Grease (aerosol)?

The signal word is danger.

What is the physical form of Interflon Fin Grease (aerosol)?

Interflon Fin Grease (aerosol) is a arosol (sprayaerosol) with wit color. It has mild odor.

What is the solubility of Interflon Fin Grease (aerosol)?

niet bepaald

What is Interflon Fin Grease (aerosol) used for?

smeermiddel

What are the hazard statements for Interflon Fin Grease (aerosol)?

This substance has 5 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan open barsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of Interflon Fin Grease (aerosol)?

The melting point is niet bepaald and the boiling point is <0 C.