NextSDS Logo
Safety Data Sheet NL

SOLUREP WALL A-COMPONENT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SOLUREP WALL A-COMPONENT

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

R

R.P.U. NV (Resin Production Unit)

manufacturer

Industriezone "Klein Gent" – Grensstraat 9, B – 2270 Herenthout

32 - (0)14/84.94.10

Emergency Contacts

Emergency Contact

32 - (0)14/84.94.10

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox.
Skin Irrit.
Eye Irrit.
Skin Sens.

GHS Pictograms

GHS06 - Acute toxicity

GHS06

Hazard Statements

H315 Irriterend voor de ogen en de huid.
H317 Kan overgevoeligheid veroorzaken bij contact met de huid.
H331 Schadelijk bij inademing, opname door de mond en aanraking met de huid.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Geformuleerd epoxyhars op basis van Bispenol A-(epichloorhydride)

Chemical Name CAS Number Concentration Hazardous
Bisphenol A-(epichloorhydride) 25068-38-6 50% Yes
Xyleen, mengsel van isomeren 1330-20-7 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Veel verse lucht aanvoeren (of het slachtoffer in de frisse lucht brengen en rustig neerleggen). Voor alle zekerheid een arts consulteren. Bij bewusteloosheid ligging en vervoer in stabiele zijligging. Patiënt warm houden.

Symptoms: Irritatie van de ademhalingswegen.

Skin contact

Verontreinigde kleding direct verwijderen. Het product mechanisch verwijderen. GEEN oplosmiddel of verdunner gebruiken. Onmiddellijk met water en zeep afwassen en goed naspoelen. Deskundige medische behandeling inschakelen.

Symptoms: Irritatie van de huid.

Eye contact

Verwijder contactlenzen. Ogen met open ooglid minstens 15 minuten onder stromend water afspoelen en aansluitend een arts consulteren.

Symptoms: Irritatie van de ogen.

Ingestion

Geen braken opwekken. Mond spoelen en overvloedig water drinken met kleine slokjes (verdunningseffect). Patiënt in een rustende toestand houden. Onmiddellijk een dokter roepen en verpakking of etiket tonen. Nooit iets oraal toedienen aan een buiten bewustzijn geraakte persoon.

Symptoms: Misselijkheid, braken.

Immediate Medical Attention

Zoek medische hulp in alle gevallen van twijfel of indien de verschijnselen voortduren. Deskundige medische behandeling inschakelen. Onmiddellijk een dokter roepen.

Medical Treatment

Symptomatisch behandelen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO₂, bluspoeder of watersproeistraal. Grotere brand met watersproeistraal of met schuim dat tegen alcohol bestand is bestrijden.

Unsuitable media

Krachtige waterstraal. Nooit rechtstreeks in een brandende plas spuiten: een harde waterstraal op hete, brandende vloeistof kan spetteren veroorzaken.

Specific hazards

Er kan koolmonoxide (CO) vrijkomen. Onder bepaalde omstandigheden mogen sporen van giftige stoffen niet worden uitgesloten. bv. waterstofchloride (HCl)

Firefighter Protection

Volledig beschermende overall aantrekken. Adembeschermingsapparaat dragen met verse luchttoevoer.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Niet beschermd personen op afstand houden. Huid-en oogcontact vermijden.

Large spill

Grote hoeveelheden indammen en wegpompen.

Environmental

Niet in de riolering/het oppervlaktewater / het grondwater laten terechtkomen.

Cleanup methods

Met vloeistof bindend materiaal opnemen. Vermijd het gebruik van oplosmiddelen. Schep het gemorste product in een gemerkt afsluitbaar vat.

Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Mensen die eerdere overgevoeligheid van de huid hebben vertoond, mogen niet tewerk worden gesteld in een situatie waar hun huid in aanraking met dit product kan komen. Bij verwerking en hantering de geldige MAC-waarden in acht houden.

Storage

Koel en droog bewaren in goed gesloten verpakking.

Fire prevention

Verwijderd houden van ontstekingsbronnen. Niet roken.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Geen aanvullende gegevens. Zie 7.

Hands

Handschoenen uit kunststof met veiligheidsmanchet, bv. nitrilrubber of PVC.

Eyes

Nauw aansluitende veiligheidsbril.

Respiratory

Draag adembeschermingsapparatuur met verse luchttoevoer, indien er niet voldoende ventilatie/afzuiging aanwezig is, of als het product verspoten wordt.

Skin/Body

Draag geschikte beschermende arbeidskleding met armbescherming. Onder normale omstandigheden zijn werkpakken of overalls van katoen of een katoen/synthetische vezel geschikt. Een voorschoot uit rubber of PVC kan ook gedragen worden. Vloeistofdichte schoenen dragen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
niet bepaald
Kinematic Viscosity
---
Cloud Point
---
Upper Explosive Limit
niet bepaald
Odor
zwak, karakteristiek
Flash Point
niet bepaald
Vapor Pressure
niet bepaald
Lower Explosive Limit
niet bepaald
Colour
lichtgeel
Colour Intensity
---
Voc Content
---
Evaporation Rate
---
Properties Status
---
Bulk Density
---
Appearance
thixotrope vloeistof
Molecular Weight
---
Physical State
thixotrope vloeistof
Freezing Point
---
Explosive Limits
---
Crystallisation Point
---
Solubility In Water
niet oplosbaar
Softening Point
---
Dynamic Viscosity
niet bepaald
Ph
niet bepaald
Form
---
Solidification Point
---
Physical State Data
liquid
Partition Coefficient
---
Solubility In Fat
---
Auto Ignition Temperature
niet bepaald
Relative Density
---
Melting Point
niet bepaald
Solubility
---
Decomposition Temperature
niet bepaald
Vapor Density
---
Metal Corrosion
---
Relative Evaporation Rate
---
Odor Threshold
---
Flammability
---
Density
ca. 1,1 g/cm³ bij 20 °C
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Geen ontleding indien op de juiste wijze bewaard en gebruikt.

Hazardous reactions

Kan met aminen en mercaptanen onder sterke warmteontwikkeling reageren.

Avoid

Uit de buurt houden van sterke zuren.

Incompatible

sterke zuren, aminen, mercaptanen

Decomposition

Bij opslag en gebruik volgens voorschrift : geen.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Afvoeren naar een erkende afvalverwerker. Er wordt aanbevolen om eventueel overtollig product te verassen in een geschikte vuilverbrandingsinstallatie.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SOLUREP WALL A-COMPONENT?

The signal word is danger.

What is the physical form of SOLUREP WALL A-COMPONENT?

SOLUREP WALL A-COMPONENT is a thixotrope vloeistof appearing as thixotrope vloeistof with lichtgeel color. It has zwak, karakteristiek odor.

What are the hazard statements for SOLUREP WALL A-COMPONENT?

This substance has 3 hazard statements:

  • H315: Irriterend voor de ogen en de huid.
  • H317: Kan overgevoeligheid veroorzaken bij contact met de huid.
  • H331: Schadelijk bij inademing, opname door de mond en aanraking met de huid.

What is the melting point of SOLUREP WALL A-COMPONENT?

The melting point is niet bepaald and the boiling point is niet bepaald.