NextSDS Logo
Safety Data Sheet NL

Natriumhydroxide plaatjes zuiver EMPLURA®

CAS 1310-73-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Natriumhydroxide plaatjes zuiver EMPLURA®
Product Form
plaatjes
Product Code
1.06462
Chemical Name
Natriumhydroxide

Regulatory Identifiers

CAS Number
1310-73-2 Check regulations →
REACH No.
01-2119457892-27-XXXX

Identified Uses

Chemische productie, Reagens voor analyse

Manufacturers & Suppliers

M

Millipore

manufacturer

M

Merck Life Science BV/SRL

national supplier

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Skin Corr. Cat. 1A H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 Kan bijtend zijn voor metalen.
H314 Veroorzaakt ernstige brandwonden en oogletsel.

Precautionary Statements

P234 Uitsluitend in de oorspronkelijke verpakking bewaren.
P260 Stof of nevel niet inademen.
P280 Draag beschermende handschoenen/ beschermende kleding/ oogbescherming/ gelaatsbescherming/ gehoorbescherming.
P303 + P361 + P353 BIJ CONTACT MET DE HUID (of het haar): verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen.
P304 + P340 + P310 NA INADEMING: de persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen. Onmiddellijk een ANTIGIFCENTRUM/ arts raadplegen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Natriumhydroxide EC: 215-185-5 1310-73-2 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Warn a doctor.

Skin contact

Remove contaminated clothing immediately. Rinse/shower skin with water. Warn a doctor immediately.

Eye contact

Rinse with plenty of water. Consult an ophthalmologist immediately. Remove contact lenses.

Ingestion

Let victim drink water (no more than two glasses). Warn a doctor immediately.

Symptoms: Risk of perforation.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Deze aanbeveling heeft alleen betrekking op het in het veilgheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Volledig contact Materiaal: Nitrilrubber Minimale laagdikte: 0,11 mm Doorbraaktijd: 480 min Getest materiaal:KCL 741 Dermatril L. Deze aanbeveling heeft alleen betrekking op het in het veilgheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Spad contact Materiaal: Nitrilrubber Minimale laagdikte: 0,11 mm Doorbraaktijd: 480 min Getest materiaal:KCL 741 Dermatril L

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiele instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril

Respiratory

nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Skin/Body

beschermende kleding

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Pressure
< 24 hPa bij 20 C
Appearance
Vorm: vast Kleur: wit
Odor
reukloos
Flammability
Het product is niet brandbaar.
Relative Evaporation Rate
---
Solidification Point
---
Softening Point
---
Metal Corrosion
---
Melting Point
318 C
Physical State Data
solid
Decomposition Temperature
Geen gegevens beschikbaar
Solubility In Fat
---
Voc Content
---
Vapor Density
1,38 - (Lucht = 1,0)
Cloud Point
---
Explosive Limits
---
Kinematic Viscosity
Geen gegevens beschikbaar
Solubility
---
Flash Point
Niet van toepassing
State Under Standard Conditions
---
Molecular Weight
---
Odor Threshold
Niet van toepassing
Solubility In Water
1.090 g/l bij 20 C
Properties Status
---
Colour
wit
Upper Explosive Limit
Geen gegevens beschikbaar
Boiling Point
1.390 C bij 1.013 hPa
Form
vast
Density
2,13 g cm3 bij 20 C
Crystallisation Point
---
Lower Explosive Limit
Geen gegevens beschikbaar
Relative Density
Geen gegevens beschikbaar
Auto Ignition Temperature
Geen gegevens beschikbaar
Ph
circa> 14 bij 100 g/l bij 20 C
Physical State
vast
Bulk Density
---
Evaporation Rate
Geen gegevens beschikbaar
Colour Intensity
---
Dynamic Viscosity
Geen gegevens beschikbaar
Freezing Point
318 C
Partition Coefficient
Geldt niet voor anorganisch stoffen
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1823
Shipping Name
SODIUM HYDROXIDE, SOLID
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Natriumhydroxide plaatjes zuiver EMPLURA®?

The signal word is danger.

What is the physical form of Natriumhydroxide plaatjes zuiver EMPLURA®?

Natriumhydroxide plaatjes zuiver EMPLURA® is a vast appearing as vorm: vast kleur: wit with wit color. It has reukloos odor.

What is Natriumhydroxide plaatjes zuiver EMPLURA® used for?

Chemische productie, Reagens voor analyse

What are the hazard statements for Natriumhydroxide plaatjes zuiver EMPLURA®?

This substance has 2 hazard statements:

  • H290: Kan bijtend zijn voor metalen.
  • H314: Veroorzaakt ernstige brandwonden en oogletsel.

What is the melting point of Natriumhydroxide plaatjes zuiver EMPLURA®?

The melting point is 318 C and the boiling point is 1.390 C bij 1.013 hPa.