NextSDS Logo
Safety Data Sheet NL

1,3-Propaandiol synthese kwaliteit

CAS 504-63-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
1,3-Propaandiol synthese kwaliteit
Product Code
8.07481
Chemical Name
1,3-Propaandiol

Regulatory Identifiers

CAS Number
504-63-2 Check regulations →
REACH No.
Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie of voor het jaarlijks volume geen registratie vereist is.

Identified Uses

Synthese chemicalie

Manufacturers & Suppliers

M

Millipore

distributor

M

Merck Life Science BV/SRL

national supplier

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Specifieke samenstelling tengevolge van toepasbare regelgeving niet noodzakelijk te tonen

Chemical Name CAS Number Concentration Hazardous
N/A EC: 207-997-3 504-63-2 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

frisse lucht.

Skin contact

Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.

Eye contact

uitspoelen met ruim voldoende water. Contactlenzen uitnemen.

Ingestion

slachtoffer water laten drinken (niet meer dan twee glazen). Indien onwel: arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water Schuim Kooldioxide (CO2) Droogpoeder

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Koolstofoxiden. Brandbaar. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.

Firefighter Protection

Draag bij brand een autonoom ademhalingsapparaat.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Gemorst materiaal verzamelen, binden en afpompen. Neem de mogelijke materiaalbeperkingen in acht (zie de paragrafen 7 en 10). Met vloeistofabsorberend materiaal, b.v. Chemizorb, opnemen. Ter afvalverwerking aanbieden. Reinig het getroffen oppervlak.

Materials: vloeistofabsorberend materiaal, b.v. Chemizorb

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Voor voorzorgsmaatregelen zie hoofdstuk 2.2

Storage

Goed afgesloten. Aanbevolen bewaartemperatuur, zie productlabel.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Deze aanbeveling heeft alleen betrekking op het in het veilgheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Volledig contact Materiaal: Nitrilrubber Minimale laagdikte: 0,11 mm Doorbraaktijd: 480 min Getest materiaal:KCL 741 Dermatril L Deze aanbeveling heeft alleen betrekking op het in het veilgheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Spad contact Materiaal: Nitrilrubber Minimale laagdikte: 0,11 mm Doorbraaktijd: 480 min Getest materiaal:KCL 741 Dermatril L

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiele instellingen zoals NIOSH (US) of EN166 (EU). beschermbril

Respiratory

Aanbevolen filtertype: Filter A (volgens DIN 3181) voor dampen van organische verbindingen De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenterd.

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Form
---
Partition Coefficient
Geen gegevens beschikbaar
Colour Intensity
---
Ph
Geen gegevens beschikbaar
Odor Threshold
---
Solubility In Water
1.000 g/l bij 21 C - Richtlijn test OECD 105- volledig oplosbaar
Decomposition Temperature
Geen gegevens beschikbaar
Kinematic Viscosity
44,923 mm2/s bij 24 C
Odor
Geen gegevens beschikbaar
Solidification Point
---
Relative Density
1,05 bij 25 C
Appearance
---
Physical State Data
liquid
Dynamic Viscosity
Geen gegevens beschikbaar
Melting Point
-24,6 C - Richtlijn test OECD 102
Evaporation Rate
---
Upper Explosive Limit
Geen gegevens beschikbaar
Flash Point
- 99 C
Solubility
1.000 g/l bij 21 C - Richtlijn test OECD 105- volledig oplosbaar
Cloud Point
---
Relative Evaporation Rate
---
Boiling Point
208,9 C bij 989,91585 hPa
Softening Point
---
Flammability
Geen gegevens beschikbaar
Bulk Density
---
Freezing Point
-24,6 C - Richtlijn test OECD 102
Lower Explosive Limit
Geen gegevens beschikbaar
Voc Content
---
State Under Standard Conditions
---
Metal Corrosion
---
Properties Status
---
Vapor Density
---
Physical State
vloeibaar
Density
1,05 g cm3 bij 20 C
Explosive Limits
---
Vapor Pressure
< 0,1 hPa bij 20 C
Colour
kleurloos
Crystallisation Point
---
Auto Ignition Temperature
342 C bij 1.021,24 hPa
Solubility In Fat
---
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).

Hazardous reactions

Heftige reacties mogelijk met: Oxidanten Reductiemiddelen zuurhalogeniden Zuuranhydriden

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Afvalmaterialen moeten worden afgevoerd in overeenstemming met de nation a stoffen in de origin ele verpakking en zorg ervoor dat deze niet worden gemengd met ander afv al.

Disposal

Afvalmaterialen moeten worden afgevoerd in overeenstemming met de nation a stoffen in de origin ele verpakking en zorg ervoor dat deze niet worden gemengd met ander afv al.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not dangerous goods
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 1,3-Propaandiol synthese kwaliteit?

The signal word is no signal word.

What is the physical form of 1,3-Propaandiol synthese kwaliteit?

1,3-Propaandiol synthese kwaliteit is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.

What is the solubility of 1,3-Propaandiol synthese kwaliteit?

1.000 g/l bij 21 C - Richtlijn test OECD 105- volledig oplosbaar

What is 1,3-Propaandiol synthese kwaliteit used for?

Synthese chemicalie

What is the melting point of 1,3-Propaandiol synthese kwaliteit?

The melting point is -24,6 C - Richtlijn test OECD 102 and the boiling point is 208,9 C bij 989,91585 hPa.